1Samanta A, Zhao A, Shimizu G K H, et al. Post-combustion CO2 capture using solid sorbents: A review[J]. Ind. Eng. Chem. Res., 2012, 51 (4): 1438-1463.
2Song C. Global challenges and strategies for control, conversion and utilization of CO2 for sustainable development involving energy, catalysis, adsorption and chemical processing[J]. Catal. Today, 2006, 115 (1-4): 2-32.
3Olah G A, Prakash G K S, Goeppert A. Anthropogenic chemical carbon cycle for a sustainable future[J]. J. Am. Chem. Soc., 2011, 133 (33): 12881-12898.
4Martin C F, Stockel E, Clowes R, et al. Hypercrosslinked organic polymer networks as potential adsorbents for pre-combustion CO2 capture[J].J Mater Chem., 2011, 21 (14): 5475-5483.
5Rao A B, Rubin E S. A technical, economic, and environmental assessment of amine-based CO2 capture technology for power plant greenhouse gas control[J]. Environ. Sci. Technol., 2002, 36 (20): 4467-4475.
6Bollini P, Didas S A, Jones C W. Amine-oxide hybrid materials for acid gas separations[J].J. Mater Chem., 2011, 21(39): 15100-15120.
7Bara J E, Camper D E, Gin D L, et al. Room-temperature ionic liquids and composite materials: Platform technologies for CO2 capture[J]. Acc. Chem. Res., 2010, 43 (1): 152-159.
8Baker R W. Future directions of membrane gas separation technology[J], Ind. Eng. Chem. Res., 2006, 41 (6): 1393-1411.
9Morris R E, Wheatley P S. Gas storage in nanoporous materials[J]. Angew. Chem. Int. Ed., 2008, 47 (27): 4966-4981.
10Choi S, Drese J H, Jones C W. Adsorbent materials for carbon dioxide capture from large anthropogenic point sources[J]. Chem. Sus. Chem., 2009, 2 (9): 796-854.
