摘要
针对IGBT模块由于电流超出安全工作区而损坏的问题,设计了一种基于HCPL-316J驱动芯片的低成本高可靠性IGBT驱动电路,详细分析了过流保护时驱动电路的工作过程,之后通过Pspice软件建立了驱动电路的仿真模型,最后通过实验验证了驱动电路过流保护理论分析和仿真模型的正确性。
The IGBT module will be damaged when the current is beyond the limit of safe operation area. This paper designed a low cost and high reliability driving circuit based on the HCPL-316J driving chip. The detailed driving circuit and working process were analyzed considering the over-current protection feature first. Then the simulation circuit of the drive circuit was established using the simulation software. The simulation result verified the theoreti- cal analysis. Finally the experimental results also verified the validity of the analysis of the IGBT drive circuit.
出处
《电工电能新技术》
CSCD
北大核心
2014年第4期67-70,80,共5页
Advanced Technology of Electrical Engineering and Energy
基金
中国科学院知识创新工程重要方向项目"面向电动汽车和智能电网应用的电力电子器件国产化研制"
国家高技术研究发展计划(863计划)资助项目(2011AA11A258)
关键词
IGBT驱动电路
过流保护
HCPL-316 J
IGBT drive circuit
HCPL-316 J
over-current protection