期刊文献+

存在共因失效的复杂可修系统可靠性评估 被引量:4

Reliability Evaluation of Complex Repairable System with Common Cause Failures
下载PDF
导出
摘要 鉴于传统方法在处理存在由部件选择性失效传播引起的共因失效的复杂可修系统可靠性与可用性评估问题时的缺陷,提出一种基于元胞自动机思想的蒙特卡洛模拟方法用以评估存在共因失效的复杂可修系统的可靠性。该方法首先将系统转化成二终端网络,然后基于问题的基本假设去模拟不同时刻下网络各边对应的状态值,利用元胞自动机并行搜索的优势判断每次模拟过程中不同时刻下网络的连通性,从而推导出计算系统可靠性、瞬时可用性、区间可用性、系统平均维修时间以及系统单位时间平均维修次数的具体算法。最后,通过算例对算法进行了说明。 Because of the drawbacks of traditional algorithms when dealing with the problems of evaluating the reliability and availability of complex repairable system containing components with propagated failures having selective effect,a Monte Carlo simulation algorithm was presented based on the idea of cellular automata.The proposed algorithm converted the system into a two-terminal net-work,then,simulated the states of each arc of the network at different times based on basic assump-tions of problems.The algorithm ascertained the connectivity of the network at different times in every iteration using cellular automata which had the advantages of parallel searching.The specific algorithms of computing reliability,instantaneous availability,interval availability,mean downtime and mean maintenance frequency per unit time of the system were proposed.Finally,an example was given to illustrate how the algorithms were applied.
出处 《中国机械工程》 EI CAS CSCD 北大核心 2014年第10期1317-1324,共8页 China Mechanical Engineering
基金 国家自然科学基金资助重点项目(70931004) 国家杰出青年科学基金资助项目(71225006)
关键词 复杂可修系统 选择性失效传播 元胞自动机 蒙特卡洛模拟 complex repairable system propagated failure having selective effect cellular automa-ta Monte Carlo simulation
  • 相关文献

参考文献23

  • 1Levitin G,Xing L D. Reliability and Performance of Multi- state Systems with Propagated Failures Having Selective Effect [J]. Reliability Engineering and System Safety, 2010,95 (6) : 655-661.
  • 2Levitin G,Xing L D,Ben-Haim H, et al. Multi-state Systems with Selective Propagated Failures and Im- perfect Individual and Group Protections[J]. Relia- bility Engineering and System Safety,2011,96(12): 1657-1666.
  • 3Goble W M,Brombacher A C,Bukowski J V. Using Stress-strain Simulations to Characterize Common Cause[M]. New York: Springer, 1998.
  • 4Roy D,Dasgupta T. A Discretizing Approach for E- valuating Reliability of Complex Systems under Stress- strength Model[J]. IEEE Transactions on Reliability, 2001,50(2) : 145-150.
  • 5Myers A. K-out-of-N.-G System Reliability with Im- perfect Fault Coverage [J]. IEEE Transactions on Reliability, 2007,56 (3) : 464-473.
  • 6Xing L D. Reliability Evaluation of Phased-Mission Systems with Imperfect Fault Coverage and Com- mon-cause Failures[J]. IEEE Transactions on Relia- bility,2007,56(1) : 58-68.
  • 7Xing L D,Dugan J B, Morrissette B A. Efficient Re- liability Analysis of Systems with Functional De- pendence Loops[J]. Maintenance and Reliability, 2009,43(3) : 65-69.
  • 8王正,谢里阳,李兵,张君一.共因失效系统动态可靠性模型[J].中国机械工程,2008,19(1):5-9. 被引量:8
  • 9李春洋,陈循,易晓山.考虑共因失效的多态系统可靠性优化[J].中国机械工程,2010,21(2):155-159. 被引量:10
  • 10Wang C N,Xing L D,Levitin G. Propagated Fail- ure Analysis for Non-repairable Systems Consider- ing Both Global and Selective Effects[J]. Reliabili- ty Engineering and System Safety, 2012, 99: 96- 104.

二级参考文献33

  • 1王学敏,谢里阳,周金宇.考虑共因失效的系统可靠性模型[J].机械工程学报,2005,41(1):24-28. 被引量:20
  • 2谢里阳,周金宇,李翠玲,王学敏.系统共因失效分析及其概率预测的离散化建模方法[J].机械工程学报,2006,42(1):62-68. 被引量:22
  • 3李翠玲,谢里阳,李剑锋.基于零件条件失效概率分布的共因失效模型[J].中国机械工程,2006,17(7):753-757. 被引量:4
  • 4Xie I. Y. Pipe Segment Failure Dependency Analysis and System Failure Probability Estimation[J]. Pressure Vessels and Piping,1998,75(6) :483-488.
  • 5Levitin G. Incorporating Common--cause Failures into Nonrepairable Multi state Series- parallel System Analysis[J]. IEEE Transaction on Reliability,2001,50(4) :380-388.
  • 6Fleming K N,Moleh A,Deremer R K. A Systematic Procedure for the Incorporation on Common Cause Failure into Risk and Reliability Models[J]. Nuclear Engineering and Design, 1986,93 : 79-245.
  • 7Mosleh A. Common Cause Failure: An Analysis Methodology and Examples[J]. Reliability Engineering and System Safety, 1991,34 : 249-292.
  • 8Atwood C L. The Binomial Failure Rate Common Cause Model[J]. Technometrics, 1986,28 ( 2 ) : 139- 148.
  • 9Mankamo T. Dependent Failure Modeling in Highly Redundant Structures--Application to BWR Safety Valves[J]. Reliability Engineering and System Safety, 1992,35 (2) : 235-244.
  • 10Xie Liyang. A Knowledge Based Multi Dimension Discrete Common Cause Failure Model[J]. Nuclear Engineering Design, 1998,183 : 107-116.

共引文献33

同被引文献50

  • 1王学敏,谢里阳,周金宇.考虑共因失效的系统可靠性模型[J].机械工程学报,2005,41(1):24-28. 被引量:20
  • 2周金宇,谢里阳,王学敏.多状态系统共因失效分析及可靠性模型[J].机械工程学报,2005,41(6):66-70. 被引量:19
  • 3沈祖培,唐辉.有共因失效的系统可靠性的GO法分析[J].清华大学学报(自然科学版),2006,46(6):829-832. 被引量:25
  • 4Lin Y K. Reliability of a Computer Network in Case Capacity Weight Varying with Arcs, Nodes and Types of Commodity [J]. Reliability Engineering System Safety, 2007, 92(5): 646-652.
  • 5Dohmen K. Inclusion-exclusion and Network Relia- bility [J]. The Electronic Journal of Combinatorics, 1998, 5(1): 1-8.
  • 6Fratta L, Montanari U. A Boolean Algebra Method for Computing the Terminal Reliability in a Com- munication Network[J]. IEEE Transactions on Cir- cuit Theory, 1973, 20(3): 203-211.
  • 7Moskowitz F. The Analysis of Redundancy Net- works [J]. American Institute of Electrical Engi- neers, Part I: Transactions of the Communication and Electronics, 1958, 77(5): 627-632.
  • 8Hsu S J, Yuang M C. Efficient Computation ofTerminal-pair Reliability Using Triangle Reduction in Network Management [C]//Proceedings of IEEE International Conference on Communications. At- lanta, 1998: 281-285.
  • 9Rocco S C M, Zio E. Solving Advanced Network Reliability Problems by Means of Cellular Automata and Monte Carlo Sampling [J]. Reliability Engi- neering & System Safety, 2005, 89(2): 219-226.
  • 10Billinton R, Allan N R. Reliability Evaluation of Engineering Systems, Concepts and Techniques [M]. New York: Plenum Press, 1992.

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部