含聚污水配制稀释聚合物体系性能研究

Study on the Properties of Dilute Polymer Systems Prepared with Polymer-bearing Wastewater

为研究大庆油田聚合物驱油过程中含聚污水配制聚合物体系对聚合物性能的影响,通过配制等浓度的驱油体系,对体系的黏度和抗剪切性能、黏弹性、稳定性、分子线团尺寸的测定,确定了含聚污水对聚合物性能的影响。结果表明:在配制浓度相同的条件下,聚合物溶液体系储能模量、损耗模量、黏度稳定性、分子线团尺寸和抗剪切性随污水含聚浓度增加而增加,清水体系性能优于污水体系性能,物化污水体系性能优于生化污水体系性能,污水中的残余聚合物具有良好的增黏性。因此含聚污水对聚合物体系性能具有一定的提升,可以作为配制聚合物的用水。

Isoconcentration flooding systems were prepared, their viscosity, sheafing resistance, viscoelasticity, stability and molecule clew size were measured and the impact of polymer-beating wastewater on polymer performance was determined in order to study the impact of polymer systems prepared with polymer-beating wastewater on polymer performance in the polymer flooding process of Daqing oilfield. The result indicates ： at the same preparation concentration, the storage modulus, loss modulus, viscosity stability, molecule clew size and shearing resistance of polymer solution systems are increased with increase in the polymer concentration in wastewater, the properties of a fresh water system are better than those of a wastewater system, the properties of a physicochemical wastewater system are better than those of a biochemical wastewater system, and the residual polymers in sewage have good viscosity increasing capacity. Therefore, polymer-bearing wastewater improves the properties of polymer systems to a certain degree and can be used as water for polymer system preparation.