期刊文献+

调质型钢板的体积膨胀分析 被引量:1

Volume Expansion of Quenched and Tempered Steel Plate
下载PDF
导出
摘要 调质型钢板生产过程中由于组织的变化导致晶体结构变化,形成的固溶马氏体正方晶体结构导致晶格畸变,正方度增大,晶体致密度的减小,使相同重量的试样体积膨胀。最后通过实验分析发现调质后钢板膨胀率在4‰左右。 In the production process of quenched and tempered steel plate,structural changes lead to changes in crystalline structure.Formation of solid solution of martensite square crystal structure causes lattice distortion,increases the square degree and reduces crystalline density,expanding the volume of samples with same weight.Macro analysis found that the expansion rate of quenched and tempered steel plate was around 4‰.
出处 《安徽冶金》 2014年第1期29-30,37,共3页 Anhui Metallurgy
关键词 马氏体 膨胀 晶体结构 Martensite expansion crystalline structure
  • 相关文献

参考文献1

二级参考文献10

  • 1陈乃录,高长银,单进,潘健生,叶健松,廖波.动态淬火介质冷却特性及换热系数的研究[J].材料热处理学报,2001,22(3):41-44. 被引量:30
  • 2Inoue T. Macro-meso-and nanoscopic metalio thermo mechanics [ A ] .2nd International Conference on Thermal Process Modelling and Computer Simulation [ C ] . Nancy, France, 2004:3 -20.
  • 3Veaux M, Denis S, Archambanlt P. Modelling and experimental study of the bainitic transformation, residual stresses and deformations in the quenching process of middle alloyed steel parts [ A ]. 2nd International Conference on Thermal Process Modelling and Computer Simulation [ C ] . Nancy, France. 2004:719-726.
  • 4Seong H K, Yong T I. Three-dimensional thermo- elasticplastic finite element modeling of quenching process of plain-carbon steel in couple with phase transformation [ J ]. International Journal of Mechanical Sciences, 2007, 49: 423 -439.
  • 5Ronda J, Oliver G J. Consistent thermo-mechano-metallurgical model of welded steel with unified approach to derivation of phase evolution laws and transformation- induced plasticity [ J ]. Computer Methods in Applied Mechanics and Engineering, 2000, 189(2) : 361-417.
  • 6Coret M, Combescure A. A mesomodel for the numerical simulation of the multiphasic behavior of materials under anisothermal loading (application to two low-carbon steels) [ J]. International Journal of Mechanical Sciences, 2002, 44 (9) : 1947-1963.
  • 7潘健生,王婧,韩利战,顾剑锋.热处理数值模拟工程应用的一些尝试[J].金属热处理,2008,33(1):3-8. 被引量:19
  • 8孙朝阳,方刚,雷丽萍,曾攀.装甲钢马氏体相变塑性的实验研究[J].塑性工程学报,2008,15(1):70-75. 被引量:8
  • 9孙朝阳,方刚,雷丽萍,曾攀.温度和相变影响的弹塑性本构关系及应用[J].材料热处理学报,2008,29(1):162-166. 被引量:6
  • 10杨超,田时雨.装甲钢动态性能与抗弹性能关系研究[J].兵器材料科学与工程,2002,25(1):3-7. 被引量:20

共引文献5

同被引文献5

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部