期刊文献+

Synthesis of ZrSiN composite films using a plasma focus device

Synthesis of ZrSiN composite films using a plasma focus device
下载PDF
导出
摘要 ZrSiN thin films are synthesized by using plasma focus through various numbers of focus shots (10, 20, and 30), with samples placed at 9 cm away from the tip of the anode. Crystal structures, surface morphologies, and elemental compositions of ZrSiN films are characterized by an X-ray diffractometer (XRD) and scanning electron microscope (SEM) attached with energy dispersive X-ray spectroscopy (EDS). XRD patterns confirm the formations of polycrystalline ZrSiN films. Crystallinity of nitride increases with the increase of focus shot number. The average crystallite size of zirconium nitride increases from 27 ± 3 nm to 73±8 nm and microstrain decreases from 2.28 to 1.0 with the increase of the focus shot number. SEM results exhibit the formations of granular and oval-shaped microstructures, depending on the number of focus shots. EDS results confirm the presences of silicon, zirconium, nitrogen, and oxygen in the composite films. The content values of Zr and N in the composite films increase with the increase of the focus shot number. ZrSiN thin films are synthesized by using plasma focus through various numbers of focus shots (10, 20, and 30), with samples placed at 9 cm away from the tip of the anode. Crystal structures, surface morphologies, and elemental compositions of ZrSiN films are characterized by an X-ray diffractometer (XRD) and scanning electron microscope (SEM) attached with energy dispersive X-ray spectroscopy (EDS). XRD patterns confirm the formations of polycrystalline ZrSiN films. Crystallinity of nitride increases with the increase of focus shot number. The average crystallite size of zirconium nitride increases from 27 ± 3 nm to 73±8 nm and microstrain decreases from 2.28 to 1.0 with the increase of the focus shot number. SEM results exhibit the formations of granular and oval-shaped microstructures, depending on the number of focus shots. EDS results confirm the presences of silicon, zirconium, nitrogen, and oxygen in the composite films. The content values of Zr and N in the composite films increase with the increase of the focus shot number.
出处 《Chinese Physics B》 SCIE EI CAS CSCD 2014年第6期381-386,共6页 中国物理B(英文版)
基金 supported by the National Project for Research for University,the Higher Education Commission(HEC),Pakistan
关键词 DPF ZrSiN thin films XRD SEM DPF, ZrSiN thin films, XRD, SEM
  • 相关文献

参考文献30

  • 1Obedander B C, Franck M, Campbell P, Celis J P, Roos J, Hellemans L and Snauwaert J 1994 Thin Solid Films 241 222.
  • 2Vaz E Rebouta L, Ramos S, da Silva M F and Soares J C 1998 Surface and Coatings Technology 108-109 236.
  • 3Pilloud D, Pierson J F, Marco de Lucas M C and Alnot M 2004 Appl. Surf. Sci. 229 132.
  • 4Heim D and Hochreiter R 1998 Surface and Coatings Technology 98 1553.
  • 5Holub E Jflek M and Sfma M 1999 Surface and Coatings Technology 120-121 184.
  • 6Brandstetter E, Mitterer C and Ebner R 1991 Thin Solid Films 201 123.
  • 7Mae T, Nose M, Zhou M, Nagae T and Shimamura K 2001 Surface and Coatings Technology 142-144 954.
  • 8Nose M, Zhou M, Nagae T, Mae T, Yokota M and Saji S 2000 Surface and Coatings Technology 132 163.
  • 9Pilloud D, Pierson J E Marques A P and Cavaleiro A 2004 Surface and Coatings Technology 180-181 352.
  • 10Winkelmann A, Cairney J M, Hoffman M J, Martin P J and Bendavid A 2006 Surface and Coatings Technology 200 4213.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部