期刊文献+

低Reynolds数空气来流正庚烷液滴蒸发过程熵产特性

Entropy production characteristics through n-heptane evaporation in low Reynolds number incoming air flow
下载PDF
导出
摘要 车用内燃机、航空发动机燃料的主要成分为正庚烷液体。液体燃烧属于扩散型燃烧,燃料先雾化成油雾,然后蒸发,燃油蒸气在气态扩散火焰中燃烧。油雾蒸发是液体燃烧中的重要过程,是决定液体燃烧的燃烧速率的关键步骤。建立了一个二维准稳态的液滴蒸发数值模型,分析了液滴蒸发的熵产,推导出了三维笛卡尔坐标系下的传质熵产公式。基于Fluent软件进行了数值模拟,结果显示低Reynolds数空气来流中的液滴蒸发过程的熵产主要由导热熵产组成,且液滴蒸发越容易,相对总熵产越小,从热力学角度来看其液滴蒸发过程更优。 The main component of vehicle internal combustion engine and aircraft engine fuel is n-heptane. Combustion of liquid fuel belongs to diffusive combustion. The combustion process is composed of atomization, evaporation and diffusive combustion, and the evaporation process is vitally important, which critically determines the combustion speed of fuel droplet. Hence it is essential to optimize this process. In this paper, the evaporation of n-heptane droplet was evaluated from the perspective of second law of thermodynamics. A two-dimensional quasi-steady state model of the evaporation process was proposed, and the entropy production of the process was solved by integration of the volumetric entropy production rate in the whole domain. The viscous, conductive, mass transfer entropy production was investigated and compared, with the help of viscous and conductive entropy production rate equations reported in literatures and mass transfer entropy production rate equation derived in this paper, after numerical simulation of the evaporation process with Fluent software. Also, the relative total entropy production was defined. Conductive entropy production was the main part of the total entropy production of n-heptane evaporation in the low-Re air flow. With increasing Re and temperature of airflow, relative total entropy production decreased. In other words, the evaporation process produced less entropy relatively and it became easier, which from a thermodynamics perspective was optimal.
出处 《化工学报》 EI CAS CSCD 北大核心 2014年第6期1971-1977,共7页 CIESC Journal
基金 国家自然科学基金项目(51006026 91216123) 中央高校基本科研业务费专项资金(HIT.NSRIF.2012.072)~~
关键词 雾化燃烧 液滴蒸发 传质 热力学 数值模拟 熵产 atomization combustion droplet evaporation mass transfer thermodynamics numerical simulation entropy production
  • 相关文献

参考文献7

二级参考文献108

  • 1张旭,陈沛霖.直接蒸发冷却过程不可逆热动力学分析[J].同济大学学报(自然科学版),1995,23(6):638-643. 被引量:5
  • 2谢公南,王秋旺,罗来勤.管内强化传热性能的熵产分析与性能评价[J].化工学报,2006,57(2):241-245. 被引量:14
  • 3王文华,陈林根,孙丰瑞.实际闭式中冷回热燃气轮机循环的效率优化[J].中国电机工程学报,2006,26(1):12-15. 被引量:14
  • 4Yang Shiming(杨世铭),Tao Wenquan(陶文铨).Heat Transfer(传热学).3rded.Beijing:Higher Education Press,1998.
  • 5Kays W M, London A L. Compact Heat Exchanger. 3rd ed. New York.. McGraw Hill, 1984.
  • 6Beek W J, Muttzall K M K, Heuven J W. Transport Phenomena. 2nd ed. New York: John Wiley & Sons, 1999.
  • 7Bejan A. Entropy Generation Through Heat and Fluid Flow. New York: Wiley, 1982.
  • 8Sahin Z. Irreversibilities in various duct geometries with constant wall heat flux and laminar flow. Energy, 1998, 23:465-473.
  • 9Ratts E B, Raut A G. Entropy generation minimization of fully developed internal flow with constant heat flux. JournalofHeat Transfer, 2004, 126:656-659.
  • 10Sahin Z. Entropy generation in turbulent liquid flow through a smooth duct subjected to constant wall temperature. International Journal of Heat and Mass Transfer, 2000, 43:1469-1478.

共引文献33

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部