摘要
利用VC++6.0语言为后台程序支撑,研究出等间距的直线逼近渐开线砂轮修整软件。生成软件界面,在界面上可以输入不同的节点,实现不同齿数与模数的齿轮磨削砂轮的修整,并且可以实现动态仿真,生成逼近坐标点。以法向允差ε为精度目标,利用等间距的方式进行直线逼近,得出下一个节点的坐标值,此直线逼近渐开线的算法,其间距相等,使离散点数既满足所需精度要求,又提高了效率。
The software of evenly spaced linear approaching involute grinding wheel dressing was studied based on the vc＋＋ 6.0 language,and it can Generate software interface and Can enter different nodes on the interface,so the Different number of teeth and module of gear of grinding wheel＇s dressing can be achieved,and the dynamic simulation can realized , approximate coordinates Generated. The paper Ephraim to tolerance precision target, used the Equally spaced for the Straight line approaching, got the next node coordinates. The involution of the linear approximation algorithm＇s Spacing is equaling, it can Discrete points to satisfy the required accuracy requirement, and can improve the efficiency.
出处
《传动技术》
2014年第1期38-41,共4页
Drive System Technique
关键词
砂轮
修整
渐开线
等间距
grinding wheel Dressing Involute Equaling spacing
