期刊文献+

Effects of Heat Treatment Process Parameters on Microstructure and Mechanical Properties of DP440Cold Rolled Strip 被引量:1

Effects of Heat Treatment Process Parameters on Microstructure and Mechanical Properties of DP440Cold Rolled Strip
原文传递
导出
摘要 In order to optimize the production process, improve the production efficiency and accelerate the development and application of the domestic dual-phase steel, the effects of heat treatment process parameters on microstructure and mechanical properties of DP440 cold rolled strip were studied by the CAS-300 simulated continuous annealing equipment. When the heating rate increased from 5 to 100 ℃/s, both the tensile strength and yield strength increased because of the decreased grain size. When the intercritical annealing temperature increased from 780 to 850 ℃, the martensite content decreased so that the tensile strength decreased first, then increased, and the yield strength increased. When the rapid cooling rate increased from 25 to 100 ℃/s, because the martensite content increased, the tensile strength increased, while the yield strength decreased. When the overaging temperature increased from 260 to 400 ℃, the tensile strength decreased, while the yield strength increased. When the overaging time increased from 240 to 480 s, the tensile strength decreased a little, while the yield strength increased a little. In order to optimize the production process, improve the production efficiency and accelerate the development and application of the domestic dual-phase steel, the effects of heat treatment process parameters on microstructure and mechanical properties of DP440 cold rolled strip were studied by the CAS-300 simulated continuous annealing equipment. When the heating rate increased from 5 to 100 ℃/s, both the tensile strength and yield strength increased because of the decreased grain size. When the intercritical annealing temperature increased from 780 to 850 ℃, the martensite content decreased so that the tensile strength decreased first, then increased, and the yield strength increased. When the rapid cooling rate increased from 25 to 100 ℃/s, because the martensite content increased, the tensile strength increased, while the yield strength decreased. When the overaging temperature increased from 260 to 400 ℃, the tensile strength decreased, while the yield strength increased. When the overaging time increased from 240 to 480 s, the tensile strength decreased a little, while the yield strength increased a little.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2014年第5期509-516,共8页
基金 Item Sponsored by National Natural Science Foundation of China(51174057,51274062) National High Technology Researchand Development Program of China(2012AA03A503)
关键词 dual-phase steel heat treatment MICROSTRUCTURE mechanical property dual-phase steel heat treatment microstructure mechanical property
  • 相关文献

参考文献17

  • 1T. T. Dou, Y. L. Kang, H. Yu, Heat Treat. Met. 33 (2008) No. 3, 31-35.
  • 2S. J. Kim, Y.G. Cho, C.S. Oh, D.E. Kim, M.B. Moon, H.N. Han, Mater. Des. 30 (2009) 1251 1257.
  • 3Z. Zhu, Iron and Steel 35 (2000) No. 11, 66-70.
  • 4M. Zhang, R. Y. Fu, L.P. Xu, Heat Treatment 4 (2001) No. 1, 5-8.
  • 5G. M. Yang, Study on the Structure and Properties of DP590 Cold-rolled Dual Phase Steel, Northeastern University, Sheny ang, 2010.
  • 6Y. L. Kang, S. Kuang, R. D. Liu, L. Yah, Angang Technology 8 (2008) No. 4, 1-8.
  • 7M. T. Ma, B. R. Wu, Dual Phase Steel Physical and Mechanical Metallurgy, Metallurgical Industry Press, Beijing, 1988.
  • 8G.X. Hu, X. Cai, Materials Science Foundation, Shanghai Jiaotong University Press, Shanghai, 2009.
  • 9T. Mega, K. Hasegawa, H. Kawabe, JFE Tech. Rep. 32 (2004) No. 4, 38-43.
  • 10M. Takahashi, Nippon Steel Tech. Rep. 88 (2003) No. 6, 2-7.

同被引文献6

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部