期刊文献+

Optical properties of electrochemically synthesized polypyrrole thin films:the electrolyte effect

Optical properties of electrochemically synthesized polypyrrole thin films:the electrolyte effect
原文传递
导出
摘要 Polypyrrole thin films are prepared by the potentiostatic mode of electrodeposition at +0.7 V versus a saturated calomel electrode (SCE). The polypyrrole films are prepared in the presence of different electrolytes such as: p-toluene sulphonic acid (PTS), oxalic acid and H2SO4. The prepared films are characterized by UV- vis absorption spectroscopy and normal reflectance measurements. The electrochemically synthesized films are semiconductor in nature. The band gap energy ofpolypyrrole thin films is found to be 1.95, 1.92 and 1.79 eV for H2 SO4, oxalic acid and p-toluene sulphonic acid, respectively. The normal reflectance spectroscopy of polypyrrole films shows that the maximum reflectance is in the presence of p-toluene sulphonic acid; this is may be due to a more distinct microstructure than the others. The optical constants such as the extinction coefficient, refractive index, optical conductivity, etc. are calculated and studied with various electrolytes. Polypyrrole thin films are prepared by the potentiostatic mode of electrodeposition at +0.7 V versus a saturated calomel electrode (SCE). The polypyrrole films are prepared in the presence of different electrolytes such as: p-toluene sulphonic acid (PTS), oxalic acid and H2SO4. The prepared films are characterized by UV- vis absorption spectroscopy and normal reflectance measurements. The electrochemically synthesized films are semiconductor in nature. The band gap energy ofpolypyrrole thin films is found to be 1.95, 1.92 and 1.79 eV for H2 SO4, oxalic acid and p-toluene sulphonic acid, respectively. The normal reflectance spectroscopy of polypyrrole films shows that the maximum reflectance is in the presence of p-toluene sulphonic acid; this is may be due to a more distinct microstructure than the others. The optical constants such as the extinction coefficient, refractive index, optical conductivity, etc. are calculated and studied with various electrolytes.
出处 《Journal of Semiconductors》 EI CAS CSCD 2014年第6期1-4,共4页 半导体学报(英文版)
基金 the Department of Science and Technology,New Delhi,for financial support under the DST-PURSE scheme at the Shivaji University,Kolhapur
关键词 ELECTRODEPOSITION POLYPYRROLE extinction coefficient refractive index electrodeposition polypyrrole extinction coefficient refractive index
  • 相关文献

参考文献1

二级参考文献23

  • 1Friend R H, Gymer R W,Holmes A B,et al. Electroluminescencein conjugated polymers. Nature, 1999, 397: 121.
  • 2White H S, Kittlesen G P,Wrighton M S. Chemical derivatiza-tion of an array of three gold microelectrodes with polypyrrole:fabrication of molecular based transistor. J Am Chem Soc, 1984,106:5375.
  • 3Kittlesen G P, White H S, Wrighton M S. Chemical deriva-tivization of microelectrode arrays by oxidation of pyrrole and n-methylpyrrole: fabrication of molecule-based electronic devices.J Am Chem Soc, 1984,106: 7389.
  • 4Ansari R. Polypyrrole conducting electroactive polymers: syn-thesis and stability studies. J Chem, 2006, 3: 186.
  • 5Dong H, Cao X, Li C M. Functionalized polypyrrole film: synthe-sis, characterization, and potential applications in chemical andbiological sensors. Appl Mater Inter, 2009, 1: 1599.
  • 6Lee A S,Peteu S F, Ly J V, et al. Actuation of polypyrrolenanowires. Nanotechnology, 2008, 19: 165501.
  • 7Geetha S, Rao C R K, Vijayan M, et al. Biosensing and drugdelivery by polypyrrole. Anal Chim Acta, 2006,568: 119.
  • 8Janata J, Josowicz M. Conducting polymers in electronic chem-ical sensors. Nat Mater, 2003, 2: 19.
  • 9Ramanavicius A, Ramanaviciene A, Malinauskas A. Electro-chemical sensors based on conducting polymerpolypyrrole.Electrochim Acta, 2006, 51: 6025.
  • 10Zang J, Li X. In situ synthesis of ultrafine 卢-MnC^/polypyrrolenanorod composites for high-performance supercapacitors. JMater Chem, 2011,21: 10965.

共引文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部