Simulation of the Viscoplastic Material Behaviour of Cast Aluminium Alloys due to Thermal-Mechanical Loading
Simulation of the Viscoplastic Material Behaviour of Cast Aluminium Alloys due to Thermal-Mechanical Loading
出处
《材料科学与工程（中英文A版）》
2014年第1期56-64,共9页
Journal of Materials Science and Engineering A
参考文献24
-
1W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler, et al., Recent development in Aluminium alloys for the automotive industry, Materials Science and Engineering A 280 (2000) 37-49.
-
2H.R. Ammara, C. Moreaua, A.M. Samuel, F.H. Samuel, H.W. Doty, Influences of alloying elements, solution treatment time and quenching media on quality indices of 413-type Al-Si casting alloys, Materials Science and Engineering A 489 (2008) 426-438.
-
3R. Golloch, Downsizing bei Verbrennungsmotoren, Springer, Berlin, 2005, pp. 67-103.
-
4S. Thalrnair, Thermomechanische Ermudung yon Aluminium-Silizium-Gusslegierungen unter otto-motorischen Beanspruchungen, Ph.D. Thesis, Universitat Karlsruhe, 2009.
-
5F. Stadler, H. Antrekowitsch, W. Fragner, H.Kaufmann, E.R. Pinatel, P.J. Uggowitzer. The effect of main alloying elements on the physical properties of AI-Si foundry alloys, Materials Science & Engineering A 560 (2013) 481-491.
-
6C. Kliemt, Thermo-mechanical fatigue of cast Aluminium alloys for engine applications under severe conditions, Ph.D. Thesis, Heriot-Watt University, 2012.
-
7R. Minichmayr, Modelling and of the thermal-mechanicalfatigue of aluminium components, Ph.D. Thesis, MontanuniversitatLeoben, 2005.
-
8M. Riedler, Methodology for the modeling of thermal-mechanically loaded engine parts made of aluminium, Fortschritt-Berichte VDI 5 (718) (2005) 1-14.
-
9T. Bischoff, S. Rodlingand B. Stauder, Innovative testing for the thermal-mechcanical fatigue on cylinder heads, Materials Testing 10 (2012) 655-662.
-
10J. Lemaitre, J.L. Chaboche, Mechanics of Solid Materials, Cambridge University Press, 1990, pp. 104-346.
-
1傅铭旺,罗子健.粘塑性材料成形过程的有限元分析[J].应用力学学报,1991,8(3):142-146. 被引量：2
-
2陈拂晓,李贺军,郭俊卿,杨永顺.基于人工神经网络的轴承保持架超塑性成形工艺参数优化[J].中国机械工程,2007,18(23):2786-2788. 被引量：1
-
3何志,徐学利,李兰云,周好斌,李霄.Al-Cu-Mg合金相图的计算[J].铸造技术,2012,33(5):519-520. 被引量：2
-
4苏娟华,董企铭,刘平,李贺军,康布熙.基于人工神经网络的铜合金形变热处理工艺和性能[J].中国有色金属学报,2003,13(5):1077-1082. 被引量：11
-
5黄懋衡,傅铭旺.用粘塑性材料作为传力介质的板料半模成形工艺研究[J].南昌航空工业学院学报,1993,7(2):29-34.
-
6周古为,郑子樵,李海.基于人工神经网络的7055铝合金二次时效性能预测[J].中国有色金属学报,2006,16(9):1583-1588. 被引量：18
-
7苏娟华,李贺军,董企铭,刘平,康布熙.基于人工神经网络的铜合金时效性能研究[J].特种铸造及有色合金,2003,23(5):29-31. 被引量：3
-
8何志,张瑞杰,介万奇.用Levenberg-Marquardt算法计算相图[J].有色金属,2006,58(3):51-53. 被引量：2
-
9侯延辉,刘志义,柏松,马飞跃,柳葆生.Al-Cu-Mg-Ag合金时效强化的神经网络预测模型[J].材料热处理学报,2009,30(3):203-208. 被引量：5
-
10陈拂晓,李贺军,徐国忠,杨永顺,李合军.铁路轴承保持架的超塑成形工艺参数优化及成形试验[J].塑性工程学报,2007,14(6):142-147. 被引量：1
