期刊文献+

Microstructure and properties of aging Cu–Cr–Zr alloy 被引量:9

Microstructure and properties of aging Cu–Cr–Zr alloy
原文传递
导出
摘要 The crystallography and morphology of precipitate particles in a Cu matrix were studied using an aged Cu–Cr–Zr alloy by transmission electron microscopy(TEM) and high-resolution transmission electron microscopy(HRTEM). The tensile strength and electrical conductivity of this alloy after various aging processes were tested. The results show that two kinds of crystallographic structure associated with chromium-rich phases, fcc and bcc structure, exist in the peak-aging of the alloy. The orientation relationship between bcc Cr precipitate and the matrix exhibits Nishiyama–Wasserman orientation relationship. Two kinds of Zr-rich phases(Cu4Zr and Cu5Zr)can be identified and the habit plane is parallel to {111}Cu plane during the aging. The increase in strength is ascribed to the precipitation of Cr- and Zr-rich phase. The crystallography and morphology of precipitate particles in a Cu matrix were studied using an aged Cu–Cr–Zr alloy by transmission electron microscopy(TEM) and high-resolution transmission electron microscopy(HRTEM). The tensile strength and electrical conductivity of this alloy after various aging processes were tested. The results show that two kinds of crystallographic structure associated with chromium-rich phases, fcc and bcc structure, exist in the peak-aging of the alloy. The orientation relationship between bcc Cr precipitate and the matrix exhibits Nishiyama–Wasserman orientation relationship. Two kinds of Zr-rich phases(Cu4Zr and Cu5Zr)can be identified and the habit plane is parallel to {111}Cu plane during the aging. The increase in strength is ascribed to the precipitation of Cr- and Zr-rich phase.
出处 《Rare Metals》 SCIE EI CAS CSCD 2014年第2期134-138,共5页 稀有金属(英文版)
基金 financially supported by the Special Foundation for Technology Research and Development in Research Institute of China (No. 2011DIA5k023)
关键词 Cu–Cr–Zr alloy Aging process Crystallography Morphology Strengthening mechanism Cu–Cr–Zr alloy Aging process Crystallography Morphology Strengthening mechanism
  • 相关文献

参考文献2

二级参考文献23

  • 1楼宏青,眭润舟,任合,沈光骏.Cu-Ni-Be高导电耐磨合金时效析出的TEM研究[J].电子显微学报,1993,12(4):319-323. 被引量:2
  • 2董超群,易均平.铍铜合金市场与应用前景展望[J].稀有金属,2005,29(3):350-356. 被引量:41
  • 3甘卫平,王义仁,陈铁平,杨伏良,刘泓.6013铝合金热变形行为研究[J].材料导报,2006,20(5):111-113. 被引量:17
  • 4Ivanov A D, Nikolaev A K, Kalinin G M. Effect of heat treatments on the properties of Cu-Cr-Zr alloys [ J ]. J. Nucl. Mater. , 2002, 307-311(1) : 673.
  • 5Wang Z J, Zhong Y B, Cao G H, Wang C, Wang J, Ren W L, Lei Z S, Ben Z M. Influence of de electric current on the hardness of thermally aged Cu-Cr-Zr alloy [ J ]. Journal of Alloys and Compounds, 2009, 479: 303.
  • 6Batra I S, Dey G K, Kulkarni U D, Banerjee S. Pre- cipitation in a Cu-Cr-Zr alloy [ J ]. Mater. Sci. Eng. A, 2003, 356 (1-2) : 32.
  • 7Bayraktar E, Mora R, Garcia I M, Bathias C. Heat treatment, surface roughness and corrosion effects on the damage mechanism of mechanical components in the very high cycle fatigue regime [ J ]. International Journal of Fatigue, 2009, 31(10) : 1532.
  • 8Yao H T, Xuan F Z, Wang Z D, Tu S T. A review of creep analysis and design under multiracial stress states [ J ]. Nuclear Engineering and Design, 2007, 237 : 1969.
  • 9Pierre Marmy, Olivier Gillia. Investigations of the effect of creep fatigue interaction in a Cu-Cr-Zr alloy [ A]. Procedia Engineering [ C]. Elsevier, 2010. 407.
  • 10Park N K, Kim I S, Na Y S. Hot forging of a nickel- base superalloy [ J ]. Journal of Materials Processing Technology, 2001, 111: 98.

共引文献16

同被引文献114

引证文献9

二级引证文献48

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部