期刊文献+

Effects of the Thickness Ratio of CrN vs Cr_2O_3 Layer on the Properties of Double-layered CrN/Cr_2O_3 Coatings Deposited by Arc Ion Plating 被引量:2

Effects of the Thickness Ratio of CrN vs Cr_2O_3 Layer on the Properties of Double-layered CrN/Cr_2O_3 Coatings Deposited by Arc Ion Plating
原文传递
导出
摘要 In this study, CrN/Cr2O3 double-layered coatings with various thickness ratios of CrN vs Cr2O3 layer were prepared by arc ion plating technology. The influences of the thickness ratio of CrN vs Cr2O3 layer on the microstructural characteristics as well as the mechanical and tribological properties of the CrN/Cr2O3 doublelayered coatings were investigated. The corresponding mechanisms were also discussed. The results indicated that the insertion of CrN layer between the Cr2O3 layer and substrate can effectively decrease the internal stress level of the coating. With increasing the thickness ratio of CrN vs Cr2O3 layer, the surface roughness of double-layered coatings decreased gradually, which had a certain influence on the friction coefficient. In addition, the microhardness also declined gradually, the adhesive strength almost increased linearly, whereas the wear rate declined firstly and then increased slightly. As the thickness ratio was 2:1, the double-layered coating exhibited the best wear resistance. In this study, CrN/Cr2O3 double-layered coatings with various thickness ratios of CrN vs Cr2O3 layer were prepared by arc ion plating technology. The influences of the thickness ratio of CrN vs Cr2O3 layer on the microstructural characteristics as well as the mechanical and tribological properties of the CrN/Cr2O3 doublelayered coatings were investigated. The corresponding mechanisms were also discussed. The results indicated that the insertion of CrN layer between the Cr2O3 layer and substrate can effectively decrease the internal stress level of the coating. With increasing the thickness ratio of CrN vs Cr2O3 layer, the surface roughness of double-layered coatings decreased gradually, which had a certain influence on the friction coefficient. In addition, the microhardness also declined gradually, the adhesive strength almost increased linearly, whereas the wear rate declined firstly and then increased slightly. As the thickness ratio was 2:1, the double-layered coating exhibited the best wear resistance.
出处 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2014年第5期473-479,共7页 材料科学技术(英文版)
基金 the National Key Basic Research Program of China("973 Program",No.2012CB625100) the National Natural Science Foundation of China(No.51001106&No.51301181) the Doctoral Starting up Foundation of Liaoning Province Science and Technology Agency,China(No.20131118)
关键词 Cr2O3/CrN Double-layered coating Thickness ratio Arc ion plating Mechanical property Wear Cr2O3/CrN Double-layered coating Thickness ratio Arc ion plating Mechanical property Wear
  • 相关文献

参考文献38

  • 1X.S. Wan, S.S. Zhao, Y. Yang, J. Gong, C. Sun, Surf. Coat. Technol. 204 (2010) 1800-1810.
  • 2J. Eriksson, M. Olsson, Surf. Coat. Technol. 205 (2011) 4045-4051.
  • 3M. Pohler, R. Franz, J. Ramm, P. Polcik, C. Mitterer, Surf. Coat. Technol. 206 (2011) 1454-1460.
  • 4Y.L. Chipatecua, J.J. Olaya, D.F. Arias, Vacuum 86 (2012) 1393-1401.
  • 5Q. Wang, F. Zhou, X. Wang, K. Chen, M. Wang, T. Qian, Y. Li, Appl. Surf. Sci. 257 (2011)7813-7820.
  • 6Q.M. Wang, K.H. Kim, J. Vac. Sci. Technol. A 26 (2008)1258-1266.
  • 7H. Liu, J. Tao, J. Xu, Z. Chen, Q. Gao, Surf. Coat. Technol. 204 (2009) 28-36.
  • 8K. Pedersen, J. Bottiger, M. Sridharan, M. Sillassen, P. Eklund, Thin Solid Films 518 (2010) 4294-4298.
  • 9T.G. Wang, Y. Liu, H. Sina, C. Shi, S. Iyengar, S. Melin, K.H. Kim, Surf. Coat. Tectmol. 228 (2013) 140-147.
  • 10H.S. Ahn, O.K. Kwon, Wear 225-229 (1999) 814-824.

同被引文献12

引证文献2

二级引证文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部