摘要
采用有限元分析分析软件ANSYS,对离合器皮带轮进行静力学分析,得到位移分布和应力分布云图,进行了强度、刚度分析,接着在静力学分析基础上,使用ANSYS软件的后处理Fatigue模块,采用名义应力法对皮带轮进行了疲劳寿命预测,分析结果为离合器皮带轮的结构优化设计及控制提供可靠依据。
The static analysis of the belt-wheel in the clutch was conducted by finite element analysis software ANSYS, and the nephogram of stress displacement distribution were obtained, then the strength and stiffness were analysed, on the basis of statics analysis, the fatigue life on the belt wheel was calculated using nominal stress method at the post processing module of ANSYS and then the reliable basis were provided by analysis results for the structure optimization design and control in the clutch pulley.
出处
《漳州职业技术学院学报》
2014年第2期30-33,共4页
Journal of Zhangzhou Institute of Technology
