期刊文献+

超特高压输电线路杆塔击距系数的研究

Research from the Coefficient of UHV Transmission Line Tower Super Hit
下载PDF
导出
摘要 近年来,随着社会的不断进步和经济水平的迅猛提升,我国的电力行业也在不断深化改革。在电力设施建设中,特高杆塔和高杆塔被广泛运用,然而,因为杆塔高度相对较高,所以,它很容易遭受雷电袭击,为此需要针对超特高压输电线路杆塔击距系数展开优化研究,旨在强化线路绕击耐雷性能,以保障电力设备的安全运行。 In recent years, with the level of social and economic progress of the rapid increase, China's power industry is constantly deepening reform. In the construction of power facilities, the ultra-high towers and high towers are widely used, however, because the tower height is relatively high, so it is vulnerable to lightning attacks, for which Me need for ultra-UHV transmission line tower commenced striking distance coefficient optimization, aimed at strengthening the performance of lightning Shielding line to protect the safe operation of power equipment.
出处 《科技与创新》 2014年第8期5-6,共2页 Science and Technology & Innovation
关键词 高压 输电线路 杆塔 击距系数 hypertension transmission line tower striking distance factor
  • 相关文献

参考文献1

二级参考文献12

  • 1陈维贤,陈禾.可控并联电抗器的功能和调节[J].高电压技术,2006,32(12):92-95. 被引量:19
  • 2曾昭华.500kV输电线单相重合闸过程中的潜供电流和恢复电压[J]电网技术,1988(03).
  • 3朱拱照.采用良导体地线加速潜供电弧自灭的分析[J]高电压技术,1977(02).
  • 4曹荣江,朱拱照,崔景春.关于超高压线路上潜供电弧持续现象的研究(第二部分)[J]高电压技术,1976(03).
  • 5曹荣江,朱拱照,崔景春.关于超高压线路上潜供电弧持续现象的研究(第一部分)[J]高电压技术,1975(01).
  • 6Kimbark E W.Suppression of ground-fault arcs on single-pole switched EHV lines by shunt reactors. IEEE Transactions on Power Apparatus and Systems . 1964
  • 7Amstutz A.Residual currents and voltages with single-pole reclosing. Brown Boveri Review . 1948
  • 8Fukunishi M,Anjo K,Terase,et al.Laboratory study on dead time of high speed reclosing of500kV systems. CIGRE Report31-03 . 1970
  • 9Esztergalyos J,Andrichak J,Colwell DH,et al.Single phase tripping and auto reclosing of transmission lines. IEEE Transactions on Power Delivery . 1992
  • 10At muri S R,Thallam R S,Gerlach D Wet al.Neutral reac-tors on shunt compensated EHVlines. IEEE1994Trans-mission and Distribution Conference . 1994

共引文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部