期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

铝合金无铆钉自冲铆接仿真研究 被引量：3

The Simulation Research of Mechanical Clinched Joint between Aluminum Alloy
下载PDF
导出
摘要 文章主要针对无铆钉自冲铆接成形工艺进行研究,运用有限元分析软件LS-DYNA对不同压边力条件下无铆钉铆接接头成形后回弹性能的影响以及接头拉伸力学性能的影响进行分析,研究接头的失效模式,确定该模型在考虑回弹和力学性能的条件下得到最佳的压边力。 The paper we mainly focus on the research of joints forming process, introduced the analysis of the resilience after the joints forming and the tensile mechanical properties of the joints under different blank holder force conditions using the finite element analysis software LS-DYNA, and analyzed the failure mode of the joints, then considered the rebound and the mechanical properties of different conditions to get the best blank holder force.
作者 李早科 胡浩 费丽爽 曹琪弦
机构地区 广东工业大学材料与能源学院
出处 《广东化工》 CAS 2014年第11期41-42,22,共3页 Guangdong Chemical Industry
关键词 无铆钉铆接 回弹 力学性能 压边力 mechanical clinched；forming refound mechanical performance；blank holder force
分类号 TQ [化学工程]
  • 相关文献

参考文献5

  • 1张文城,温彤,张杰,季筱玮.冲压连接技术及其发展[J].热加工工艺,2011,40(21):117-120. 被引量：5
  • 2龙江启,兰凤崇,陈吉清.基于神经网络无铆钉自冲铆接头力学性能预测[J].计算机集成制造系统,2009,15(8):1614-1620. 被引量：11
  • 3Varis J P, Lepisto J. A simple testing-based procedure and simulation of the clinching process using finite element analysis for establishing clinching parameters[J]. Thin-WalledStrucTures, 2003, (41): 691-709.
  • 4Chan-Joo Lee, Jae-Young Kim, Sang-Kon Lee, et al. Design of mechanical clinching tools for joining ofaluminium alloy sheets[J]. Materials and Design, 2010, (31): 1854-1861.
  • 5Oudjene M, Ben-Ayed L. On the parametrical study of clinch joining of metallic sheets using the Taguchi method[J]. Engineering Structures 2008, (30): 1782-1788.

二级参考文献29

  • 1VARIS J P.The suitability of clinching as a joining method for high-strength structural steel[J].Journal of Materials Processing Technology,2003,132(1/3):242-249.
  • 2VARIS J P,LEPISTO J.A simple testing-based procedure and simulation of the clinching process using finite element analysis for establishing clinching parameters[J].Thin-Walled Structures,2003,41 (8):691-709.
  • 3MOTA C P A,COSTA N G.A comparative study between the sheet joining processes by point TOX? and spot welding[C]//Proceedings of Annual Congress of the Brazilian Society for Metallurgy and Materials.Brazil:ABM,2005:2733-2741.
  • 4VARIS J.Ensuring the integrity in clinching process[J].Journal of Materials Processing Technology,2006,174(1/3):277-285.
  • 5VARIS J.Economics of clinched joint compared to riveted joint and example of applying calculations to a volume product[J].Journal of Materials Processing Technology,2006,172(1):130-138.
  • 6PAULA A A,AGUILAR M T P,PERTENCE A E M,et al.Finite element simulations of the clinch joining of metallic sheets[J].Journal of Materials Processing Technology,2007,182(1/3):352-357.
  • 7PEDRESCHI R F,SINHA B P.An experimental study of cold formed steel trusses using mechanical clinching[J].Construction and Building Materials,2008,22 (5):921-931.
  • 8HECHT-NIELSON R.Theory of the back-propagation neural network[C]//Proceedings of International Joint Conference on Neural Networks.Washington,D.C.,USA:IEEE,1989:583-604.
  • 9奥尔特温·哈恩,乌韦·克勒门斯.机械变形连接[M].杜菲娜,谭义明,译,北京:化学工业出版社,2005.
  • 10Juha Varis. Economics of clinched joint compared to riveted joint andexample of applying calculations to a volume product [J]. Journal of Materials Processing Technology, 2006, (172): 130-138.

共引文献14

同被引文献12

引证文献3

二级引证文献1

广东化工
2014年 第11期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部