摘要
顶端张紧立管广泛用于深水海洋平台之中,所处海洋环境非常复杂而容易产生疲劳损伤,因此动力响应研究非常重要。在ABAQUS中建立了张力腿平台顶端张紧立管模型,水深设为1 500m、海域为南中国海。采用海洋工程模块AQUA进行了波浪和海流加载,获得了沿立管轴向的不同位置节点的应力时间曲线。数值计算表明,由于海平面附近的立管受到波浪和海流的作用,最大应力出现在海平面下4m处,该位置为最危险点。
Top tensioned risers are widely used in deepwater platforms,and are easily to be damaged for complex marine environmental loads,so dynamic responses of which should be researched carefully.A model was established using ABAQUS to describe top tensioned risers of tension leg platforms located in China south sea,and water depth of the model was set as 1 500 m. Marine engineering model AQUA was applied to add wave and current effects on riser,and to output stress time curves at different positions along the riser.Results of calculation demonstrate that because of strong wave and current effect,the location with the largest fatigue damage rate of the riser is 4 m below sea level.
出处
《石油化工高等学校学报》
CAS
2014年第3期87-91,共5页
Journal of Petrochemical Universities
基金
北京市自然科学基金项目(KZ201210017017)
北京市教育委员会科技计划重点项目(KZ201210017017)
关键词
深水
顶端张紧立管
动力响应
应力
Deep water
Top tensioned risers
Dynamic response
Stress
