期刊文献+

季戊四醇丙烯醛树脂固化体系的流变特性研究

Study on the Rheological Property of Acrolein-Pentaerythritol Resin Curing Agent System
下载PDF
导出
摘要 测定了季戊四醇丙烯醛树脂固化体系在不同温度及催化剂含量下的粘度随时间变化数据,研究了催化剂用量和温度对固化过程中的粘度影响规律,提出了一种修正阿累尼乌斯模型,该模型可同时揭示固化反应过程中催化剂用量和温度对体系粘度变化的影响规律。研究表明,修正阿累尼乌斯模型与实验结果具有良好的一致性。阿累尼乌斯模型可为制定和改进热固性树脂体系固化工艺提供必要的参考和依据。 The effect of temperature and catalyst on viscosity of acrolein-pentaerythritol resin was studied. Based on analyzing the curing characteristics of the resin system and the non-isothermal viscosity curves, a pseudo-Ar- rhenius model was estabilished. The model could be used to indicate the regularity of viscosity change which is inf- luenced by the content of the catalyst and temperature. It is shown that, the estimated viscosity of the model was in good agreement with the experiments. The viscosity model is important for processing simulation and process parame- ters prediction of composite manufacturing.
出处 《材料导报》 EI CAS CSCD 北大核心 2014年第12期82-85,共4页 Materials Reports
基金 中物院化材所青年人才基金(QNRC-201305)
关键词 季戊四醇丙烯醛树脂 温度 催化剂 粘度模型 acrolein-pentaerythritol resin, temperature, catalyst, viscosity model
  • 相关文献

参考文献11

  • 1于剑昆.123树脂的合成、改性及在推进剂和炸药中的应用[J].化学推进剂与高分子材料,2011,9(1):31-39. 被引量:8
  • 2汤业朋 董海山 陈淼鸿.RM-123型挤注炸药.爆炸与冲击,1981,(2):110-112.
  • 3高大元,张孝仪,李广来,等.热固炸药相容性表现与机理研究[M].北京:原子能出版社,1998.
  • 4Gutowski T G.Advanced composites manufacturing[M].New York:John Wiley&Sons,1997:393.
  • 5戴夫 R S,卢斯 A C,方征平,等.高分子复合材料加工工程[M].北京:化学工业出版社,2002:309.
  • 6Salla J M,Cadenato A,Ramis X,et al.Thermoset cure kinetics by isoconversional methods[J].J Thermal Analysis Calorimetry,1999,56(2):771.
  • 7梁志勇,段跃新,林云,范欣愉,张佐光.EPON862环氧树脂体系化学流变特性研究[J].复合材料学报,2001,18(1):16-19. 被引量:33
  • 8石凤,段跃新,曾秀妮,梁志勇,张佐光.双酚A型环氧树脂/催化型固化剂体系的粘度模型[J].复合材料学报,2005,22(6):72-79. 被引量:16
  • 9Roller M B.Rheology of curing thermosets:A review[J].Polym Eng Sci,1986,26(6):432.
  • 10Halley P J,Mackay M E.Chemorheology of thermosets-An overview[J].Polym Eng Sci,1996,36(5):593.

二级参考文献48

  • 1邱婧婧,段跃新,梁志勇.RTM工艺参数对树脂充模过程影响的模拟与实验研究[J].复合材料学报,2004,21(6):70-74. 被引量:37
  • 2梁志勇 段跃新 等.RTM工艺技术及应用报告(技术鉴定报告)[M].北京:北京航空航天大学104教研室,1994..
  • 3Schulz H, Wagner H. Unsaturated cyclic acetals[J]. Angew Chem, 1950, 62(1): 105-118.
  • 4Myers D R, Magerlein B J, Staffen G W. Process of producing acrolein acetals: US, 2678950[P]. 1954- 05-18.
  • 5Fischer R F, Smith C W. Cyclic acrolein acetals[J]. Journal of Organic Chemistry, 1960, 25(3): 319-324.
  • 6Kutsenko N I, Pertsov L D, Kalinkin S F, et al. Synthesis of diallyldiene pentaerythritol[J]. Plast Massy, 1967(2): 47-48.
  • 7Kutsenko N I, Pertsov L D, Barrshtein R S. Acrolein pentaerythritol cyclic monoacetal, a starting material for allylic polyether resins[J]. Plast Massy, 1974(1): 14-15.
  • 8Shakhtakhtinskii T N, Andreev L V. Condensation of pentaerythritol with carbonyl compounds in the presence of cation exchanger KU-2[J]. Akad Nauk Azerb SSSR, 1962, 18(12): 17-21.
  • 9Raymond J K, Frank B. Diacetals: US, 2915530[P]. 1959-12-01.
  • 10大井吉晴.ジアセタ一ルの製造法:JP,49-101311[P].1974-09-25.

共引文献55

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部