摘要
随着海上风电的快速发展,风电安装船作为建设海上风电场的关键设备得到了广泛应用。针对一自升式风电安装船,探讨了其在风暴自存下的载荷种类和计算方法,应用ANSYS软件建立了整体有限元模型,通过施加相应的边界条件和外载荷,对其总体性能包括全船结构强度、锁紧结构承载性能、预压载性能、抗倾稳性及桩靴承载性能进行了分析。结果表明,风电安装船在风暴自存下总体性能满足使用要求,研究成果可为同类船型的设计分析提供参考。
With the rapid development of offshore wind power,the wind installation vessel is widely used as the key equipment to construction of offshore wind farm. The types and methods of loads are introduced for a self-elevating wind installation vessel in storm survival condition. By ANSYS, a finite element model of whole structure is found with the boundary conditions and loads,the general performance including the whole structure strength,fixation system bearing capacity,preload capacity,overturning stability and spud can bearing capacity for the vessel is analyzed. The result of analysis shows the general performance of the vessel under storm survival condition satisfies the operating requirements, the research result provides reference for the design analysis of the similar ship type.
出处
《船舶工程》
北大核心
2014年第3期24-27,共4页
Ship Engineering
基金
上海市科技人才计划项目(12R21420200)
关键词
风电安装船
总体性能
有限元计算
ANSYS
wind installation vessel
general performance
finit element analysis
ANSYS