期刊文献+

Effect of Sizing on the Interfacial Shear Strength of Carbon Fiber/Epoxy Resin Monofilament Composite 被引量:4

Effect of Sizing on the Interfacial Shear Strength of Carbon Fiber/Epoxy Resin Monofilament Composite
下载PDF
导出
摘要 The single fiber fragmentation test (SFFT) was used to measure the interracial shear strength (IFSS) of sized and unsized CF800/epoxy resin monofilament composite in order to evaluate the effect of sizing respectively. Besides, the interfacial reinforcing mechanism was explored by analyzing the surface morphology of the carbon fibers, the wettability between the carbon fibers and the epoxy resin, and the chemical characteristics of the fiber surface. Moreover, the effect of sizing on heat and humidity resistance of interface was investigated by aging test. The results show that sizing improves IFSS of CF800/epoxy resin monofilament composite by 59% through increasing the functional groups containing oxygen and through enhancing wettability, while after sizing the heat and humidity resistance of interface is decreased. The single fiber fragmentation test (SFFT) was used to measure the interracial shear strength (IFSS) of sized and unsized CF800/epoxy resin monofilament composite in order to evaluate the effect of sizing respectively. Besides, the interfacial reinforcing mechanism was explored by analyzing the surface morphology of the carbon fibers, the wettability between the carbon fibers and the epoxy resin, and the chemical characteristics of the fiber surface. Moreover, the effect of sizing on heat and humidity resistance of interface was investigated by aging test. The results show that sizing improves IFSS of CF800/epoxy resin monofilament composite by 59% through increasing the functional groups containing oxygen and through enhancing wettability, while after sizing the heat and humidity resistance of interface is decreased.
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2014年第3期483-487,共5页 武汉理工大学学报(材料科学英文版)
关键词 INTERFACE SFFT SIZING hydrothermal aging interface SFFT sizing hydrothermal aging
  • 相关文献

参考文献2

二级参考文献28

  • 1刘鸿鹏,吕春祥,李永红,杨禹,李开喜,贺福.电化学表面处理PAN基炭纤维的表面性能研究[J].新型炭材料,2005,20(1):39-44. 被引量:30
  • 2马双林.聚四氟乙烯换热器的研制及应用[J].化工装备技术,1995,16(6):47-49. 被引量:15
  • 3李敏,张佐光,孙志杰,罗慧珍.炭纤维的环氧树脂浸润特性[J].新型炭材料,2006,21(1):75-80. 被引量:13
  • 4曹霞,温月芳,张寿春,杨永岗.耐温型炭纤维乳液上浆剂[J].新型炭材料,2006,21(4):337-342. 被引量:30
  • 5SEVERINIA F,FORMARO L,PEGORAROA M,et al.Chemical modification of carbon fiber surface[J].Carbon,2002,40:735-738.
  • 6CHENG T H,ZHANG J,YUMIBRI S,et al.Sizing resin structure and interphase formation in carbon fiber composite[J].Composites,1994,25(7):661-670.
  • 7DILSIZ N,WIGHMAN J P.Surface analysis of unsized and sized carbon fibers[J].Carbon,1999,37(7):1105-1114.
  • 8YAMA H T,WIGHTMAN J P.Surface characterization of PVP sized and oxygen plasmatreated carbon fibers[J].Surface and Interface Analysis,1998,26(1):39-55.
  • 9贺福 王茂章.碳纤维及其复合材料[M].北京:科学出版社,1997..
  • 10王茂章.聚丙烯腈基炭纤维[J].新型炭材料,1998,13(4):79-79.

共引文献41

同被引文献27

  • 1陈伟明,王成忠,周同悦,杨小平.高性能T800碳纤维复合材料树脂基体[J].复合材料学报,2006,23(4):29-35. 被引量:44
  • 2徐世烺,李赫.Bond Properties and Experimental Methods of Textile Reinforced Concrete[J].Journal of Wuhan University of Technology(Materials Science),2007,22(3):529-532. 被引量:2
  • 3LIU L S, WU F, YAO H W, et al. Investigation of surface properties of pristine and γ-irradiated PAN-based carbon fibers:Effects of fiber instinct structure and radiation medium[J]. Applied Surface Science, 2015, 337:241-248.
  • 4ZHANG Q J, LIANG S B, SUI G, et al. Influence of matrix modulus on the mechanical and interfacial properties of carbon fiber filament wound composites[J]. RSC Advanced, 2015(5):25208-25214.
  • 5American Society for Testing and Materials International. Standard test method for tensile properties of polymer matrix composite materials:ASTM D 3039[S]. West Conshohocken:ASTM International, 2000.
  • 6American Society for Testing and Materials International. Standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulating materials:ASTM D 790-03[S]. West Conshohocken:ASTM International, 2003.
  • 7American Society for Testing and Materials International. Standard test method for In-plane shear response of polymer matrix composite materials by tensile test of a ±45° laminate:ASTM D 3518[S]. West Conshohocken:ASTM International, 1995.
  • 8American Society for Testing and Materials International. Standard test method for short-beam strength of polymer matrix composite materials and their laminates:ASTM D 2344[S]. West Conshohocken:ASTM International, 2000.
  • 9LUO Y F, ZHAO Y, DUAN Y X, et al. Surface and wettability property analysis of CCF300 carbon fibers with different sizing or without sizing[J]. Materials and Design, 2011, 32(2):941-946.
  • 10ZHANG R L, HUANG Y D, SU D, et al. Influence of sizing molecular weight on the properties of carbon fibers and its composites[J]. Materials and Design, 2012, 34:649-654.

引证文献4

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部