期刊文献+

The Evolution of Hardness Homogeneity in Commercially Pure Ti Processed by ECAP

The Evolution of Hardness Homogeneity in Commercially Pure Ti Processed by ECAP
下载PDF
导出
摘要 The evolution of hardness homogeneity in commercially pure titanium processed by equal channel angular pressing (ECAP) for up to 4 passes following route C at room temperature using a die of 90° was investigated by recording the microhardness on the cross-sectional and longitudinal planes of each billet. The results show that the hardness increases significantly after the first pass although there is a region of lower hardness on the cross-section running in a band near the bottom surface of the billet, and then increases by very small amounts in subsequent passes. With increasing numbers of passes, the lower hardness region near the bottom surface disappears and the microhardness values are distributed homogeneously throughout the cross- sectional and longitudinal planes after 4 passes of ECAP. The microhardness values in the central regions of the billet are slightly lower than those of the top and bottom surfaces. The results show that good homogeneity may be achieved throughout the billets after 4 passes of ECAP following route C. The evolution of hardness homogeneity in commercially pure titanium processed by equal channel angular pressing (ECAP) for up to 4 passes following route C at room temperature using a die of 90° was investigated by recording the microhardness on the cross-sectional and longitudinal planes of each billet. The results show that the hardness increases significantly after the first pass although there is a region of lower hardness on the cross-section running in a band near the bottom surface of the billet, and then increases by very small amounts in subsequent passes. With increasing numbers of passes, the lower hardness region near the bottom surface disappears and the microhardness values are distributed homogeneously throughout the cross- sectional and longitudinal planes after 4 passes of ECAP. The microhardness values in the central regions of the billet are slightly lower than those of the top and bottom surfaces. The results show that good homogeneity may be achieved throughout the billets after 4 passes of ECAP following route C.
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2014年第3期578-584,共7页 武汉理工大学学报(材料科学英文版)
基金 Funded partly by the National Natural Science Foundation of China(No.5043430) Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20116120110012) the Natural Science Foundation of Shaanxi Province of China(No.2010JM6010)
关键词 commercially pure titanium equal channel angular pressing HARDNESS HOMOGENEITY commercially pure titanium equal channel angular pressing hardness homogeneity
  • 相关文献

参考文献1

二级参考文献18

  • 1付文杰,赵西成,杨西荣,郑艳霞.室温等径弯曲通道变形工业纯钛的组织及性能研究[J].热加工工艺,2007,36(18):21-23. 被引量:18
  • 2Stolyarov V V et al.Nanostructure Materials[J],1999,11(7):947.
  • 3Kim I et al.Scripta Materialia[J],2001,45(5):575.
  • 4Semiatin et al.Metall Mater Trans[J],1999,A30:1425.
  • 5Zhao Xicheng et al.Scripta Materialia[J],2008,59(5):542.
  • 6Beyerlein,Irene J.Progress in Materials Science[J],2009,54(4):424.
  • 7Iwahashi Y.Acta Mater[J],1998,46(9):3317.
  • 8Somjeet Biswas,Satyaveer Singh Dhinwal,Satyam Suwas.Acta Materialia[J],2008,56:200.
  • 9Satyam Suwas et al.Acta Materialia[J],2011,59:1121.
  • 10Wang Y N,Huang J C.Materials Chemistry and Physics[J],2003,81:11.

共引文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部