摘要
针对某含金铜废石进行了详细的试验研究,结合矿石性质,即部分金铜矿物嵌布较粗,本次采用金铜部分快速优先浮选工艺,实现了含金铜废石资源化利用。废石中含金0.41×10-6、铜0.17%,经部分快速优先—一粗—三精—三扫闭路流程,获得含金26.26×10-6、铜13.34%的金铜精矿,金回收率达63.16%,铜回收率达79.23%,选矿效果较好,值得在同类型矿山进行推广应用,可有效提高矿山资源综合利用水平。
An experimental research on certain gold copper waste rock has been completed,combined the analysis of ore properties,namely,some of the gold inlaid copper mineral were coarser.Therefore,the rapid selective flotation process of gold copper waste rock was applied in this study,which made the resource utilization of gold copper waste rock come true.The waste stone grade was gold 0.41×10^-6,and copper 0.17%,respectively.However, after some rapid priority and the three closed circuit process,the gold copper concentrate with gold 26.26×10^-6, and copper 13.34% can be attained,indicating that gold recovery rate was 63.16%,the copper was 79.23%,and the separation effect was good.Thus,the method was worth of popularization and application in similar mines,and can effectively improve the level of comprehensive utilization of mine resources.
出处
《黄金科学技术》
CSCD
2014年第3期77-81,共5页
Gold Science and Technology
关键词
磨矿细度
闭路试验
工艺矿物学
优先浮选
资源综合利用
grinding fineness
closed-circuit test
process mineralogy
differential flotation
comprehensive utili-zation of resources