摘要
BA表面由于有其良好的表面光泽度而大受欢迎,故光泽度是衡量BA产品质量的一个重要指标。在生产过程中影响SUS304不锈钢BA产品表面光泽度因素众多,对其生产过程中涉及的原料表面粗糙度、轧制过程中轧辊材质、轧辊直径、表面粗糙度控制、轧制油膜厚度控制、轧制工艺、光亮退火工艺、平整工艺等进行试验研究,通过多组试验量化了各个工序因素对表面光泽度的影响程度。由此明确了在生产过程中提高BA产品表面光泽度的方向和控制措施,并实现针对用户在表面光泽度的实际质量需求而调节、生产出不同水平的表面光泽度产品。
Because of its good surface gloss, the surface of BA is very popular, So the gloss is an important indicator of the quality of BA products. In the production process of SUS304 stainless steel, the BA surface gloss is effected by many factors. The production process of raw surface roughness, the material of roll diameter, surface roughness, rolling oil film thickness control, rolling process, bright annealing process, modulation of rolling process were studied, the degree of influence factors on the surface gloss of each process was quantified by a lot of experiments. The direction and control measures to improve surface gloss of BA products were defined. Then, according to the different demand on the quality of surface gloss by the user, we can give them the right products.
出处
《宝钢技术》
CAS
2014年第3期69-73,共5页
Baosteel Technology
关键词
不锈钢
光泽度
光亮退火
stainless steel
gloss
bright annealing
