期刊文献+

计算机辅助颌骨肿瘤切除与重建 被引量:3

原文传递
导出
摘要 颌骨肿瘤术后缺损对患者生活质量有严重的影响,对颌骨切除后遗留的缺损进行修复重建是必要的。然而,颌骨重建手术要求外科医师有扎实的解剖基础,丰富的临床经验,高超的临床技术及良好的审美感觉。本文拟回顾国内外计算机辅助设计与制作技术在颌骨肿瘤切除与重建应用的文献,并讲述一些我们在实际应用中的临床经验。 Jaw defects after tumor ablative surgery severely affect the life quality of patients. Thus, reconstructive surgery is necessary for these patients. However, the surgeons who perform jaw reconstructive surgery are required to have not only solid knowledge of surgical anatomy, but also excellent sense of aesthetics. In this article, we will review the previous reports about the computer assisted jaw reconstruction, and share our experience of clinical application.
出处 《中国医学文摘(耳鼻咽喉科学)》 2014年第3期137-141,共5页 Chinese Medical Digest(Otorhinolaryngology)
关键词 颌肿瘤 修复外科手术 外科手术 计算机辅助 Jaw Neoplasms Reconstructive Surgical Procedures Surgery, Computer-Assisted
  • 相关文献

参考文献27

  • 1Ueda K, Tajima S, Oba S, et al. Mandibular contour reconstruction with three-dimensional computer-assisted models. Ann Plast Surg, 2001, 46: 387-393.
  • 2Toro C, Robiony M, Costa F, et al. Feasibility of preoperative planning using anatomical facsimile models for mandibular reconstruction. Head Face Med, 2007, 15: 3-5.
  • 3Vural E, Yuen JC. Combining use of resin models with external fixation in mandibular reconstruction. Arch Otolaryngol Head Neck Surg, 2007, 133: 603-607.
  • 4Farina R, Plaza C, Martinovic G. New transference technique of position of mandibular reconstructing plates using stereolithographic models. J Oral Maxillofac Surg, 2009, 67: 2544-2548.
  • 5Hannen EJ. Recreating the original contour in tumor deformed mandibles for plate adapting. Int J Oral Maxillofac Surg, 2006, 35: 183-185.
  • 6Thankappan K, Trivedi NP, Subash P, et al. Three- dimensional computed tomography-based contouring of a free fibula bone graft for mandibular reconstruction. J Oral Maxillofac Surg, 2008, 66: 2185-2192.
  • 7Cheng HT, Wu CI, Tseng CS, et al. The occlusion-adjusted prefabricated 3D mirror image templates by computer simulation: the image-gufded navigation system application in difficult cases of head and neck reconstruction. Ann Plast Surg, 2009, 63: 517-521.
  • 8Lee JW, Fang J J, Chang LR, et al. Mandibular defect reconstruction with the help of mirror imaging coupled with laser stereolithographic modeling technique. J Formos Med Assoc,2007, 106: 244-250.
  • 9Sannomiya EK, Silva JV, Brito AA, et al. Surgical planning for resection of an ameloblastoma and reconstruction of the mandible using a selective laser sintering 3D biomodei. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 2008, 106: e36-40.
  • 10Hou JS, Chen M, Pan CB, et al. Immediate reconstruction of bilateral mandible defects: anagement based on computer-aided design/computer-aided manufacturing rapid prototyping technology in combination with vascularized fibular osteomyocutaneous flap. J Oral Maxillofac Surg, 2011, 69: 1792-1797.

二级参考文献43

共引文献100

同被引文献40

  • 1LIU Y F, XU LW, ZHU H Y, et al. Technical procedures for templateguided surgery for mandibular reconstruction based on digital design and manufacturing[J]. Biomed Eng Online, 2013, 13(8): 843-854.
  • 2DENNIS R, RAQUEL G M, PETER B, et al. Importance of patientspecific intraoperative guides in complex maxillofacial reconstruction [J]. J Cranio Maxill Surg, 2013, 41(5): 382-390.
  • 3LEVINE J P, ASHISH P, SAADEH P B, et al. Computer-aided design and manufacturing in craniomaxillofacial surgery: the new state of the art[J]. J Craniofac Surg, 2012, 23(1): 288-293.
  • 4BIBB R, EGGBEER D, WILLIAMS R. Rapid manufacture of removable partial denture frameworks[J]. Rapid Prototyping J,2006, 12(2): 95-99.
  • 5WU B M, BORLAND S W, GIORDANO R A, et al. Solid freeform fabrication of drug delivery devices[J]. J Control Release,1996, 40(1-2): 77-87.
  • 6KATSTRA W E, PALAZZOLO R D, ROWE C W, et al. Oral dosage forms fabricated by three dimensional printing[J]. J Control Release, 2000, 66(1):1-9.
  • 7BENUM P, AAMODT A, NORDSLETTEN L. Customized femoralstems in osteopetrosis and the development of a guiding system for thepreparation of an intramedullary cavity[J]. Bone Joint J, 2010, 92(9):1303-1305.
  • 8CHEN H P, LIU Y Y, JIANG Z L, et al. Cell- scaffold interactionwithin engineered tissue[J]. Exp Cell Res, 2014, 323(2): 346-351.
  • 9VLADIMIR M, THOMAS B, THOMAS T, et al. Organ printing:computer-aided jet-based 3D tissue engineering[J]. Trends Biotechnol,2003, 21(4): 157-161.
  • 10ZOPF D A, HOLLISTER S J, NELSON M E, et al. Bioresorbableairway splint created with a three-dimensional printer[J]. N Engl JMed, 2013, 368(21): 2043-2045.

引证文献3

二级引证文献90

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部