摘要
以硝酸钇、硝酸铝和柠檬酸为原料,以去离子水和无水乙醇混合液为溶剂,采用凝胶燃烧法合成钇铝石榴石粉体;采用扫描电镜、热重-差热分析、红外光谱、X射线衍射分析等测试手段对前躯体和钇铝石榴石粉体进行表征,探讨混合溶剂对合成钇铝石榴石粉体的影响,研究煅烧温度和保温时间对钇铝石榴石粉体性能的影响。结果表明:混合溶剂对钇铝石榴石粉体形貌和分散性有重要影响,在采用混合溶剂(去离子水与无水乙醇体积比为2∶1)、900℃煅烧2 h条件下合成粒径约为60 nm的类球形状钇铝石榴石粉体;煅烧温度和保温时间对钇铝石榴石粉体的晶粒尺寸和晶胞参数都有重要影响。
Yttrium aluminum garnet powders were synthesized by gel combustion method taking yttrium nitrate hexahydrate, aluminum nitrate and citric acid as main raw materials, and a mixture of deionized water and ethanol as the solvent. Precursor xerogel and yttrium aluminum garnet powders were characterized by means of SEM, TG-DTA, 1R and XRD. The influence of mixed solvents on gel combustion synthesis of yttrium aluminum garnet powders were investigated. The effect of calcination temperature and holding time on properties of yttrium aluminum garnet powders were studied. The results indicate that mixed solvents have significant effect on the morphology and dispersion of as-synthesized yttrium aluminum garnet powders. Similar spherical yttrium aluminum garnet powders about 60 nm are synthesized at 900 ℃ and calcined 2 h in mixed solvents with the vohnne ratio of deionized water and ethanol of 2: 1. Calcination temperature and holding time have profound effects on crystalline size and lattice parameters of as-synthesized yttrium aluminum garnet powders.
出处
《中国粉体技术》
CAS
北大核心
2014年第3期39-43,共5页
China Powder Science and Technology
基金
四川省科技厅科技支撑计划项目
编号:2012JY0045
2011SZZ029
2012SZZ025
四川省教育厅青年项目
编号:11zb135
绵阳市科技局重点项目
编号:12J005
关键词
混合溶剂
凝胶燃烧法
煅烧温度
钇铝石榴石粉体
mixed solvent
gel combustion method
calcinationtemperature
yttrium aluminum garnet powder