期刊文献+

用电液伺服系统测试两层刚架结构的侧移刚度 被引量:1

Measurement of the Latere Stiffness of a Two-Storey Frame Structure with Electro-Hydraulic Servo Test System
下载PDF
导出
摘要 本文叙述了如何用电液伺服系统作为试验设备测试建筑结构的侧移刚度。试验过程中,编制了实时跟踪采集程序进行数据采集。通过对一榀两层刚架结构侧移刚度进行测试,结果表明电液伺服系统能对结构建立起理想的约束状态,程控数据采集和分析使试验的精度大为提高。可供研究建筑结构侧移刚度参考。 The electro-hydraulic servo system, a satisfactory equipment, is widely used in test area. As an example, this paper measures the lateral stiffness of a two-storey steel frame with electrohydraulic servo system. During the experiment, a timed-trace data-acquisition program is developed. It proves that the electro-hydraulic servo system can set up ideal restraint conditions, and the programmed data-acquis-ition and analysis result in higher precision of measurement. Key words: Servo control, lateral stiffness, timed-acquisition
作者 陈思甜
出处 《重庆交通学院学报》 1991年第1期39-43,共5页 Journal of Chongqing Jiaotong University
  • 相关文献

同被引文献10

  • 1卢铁鹰,陈思甜.用MTS电液伺服结构试验系统进行结构拟动力试验的控制程序研究[J].工程力学,1990,7(3):127-131. 被引量:2
  • 2GB50003-2001.砌体结构设计规范[s].北京:中国建筑工业出版社,2002.
  • 3Seible F, Hegemier G A, Igarashi A, Kingsley G R. Simulated seismic-load tests in full-scale five-story masonry building [J]. Journal of Structural Engineering, 1994, 120(3): 903--924.
  • 4Seible F, Priestley M J N, Kingsley G R, Kurkchubasche A G. Seismic response of full-scale five-story reinforced-masonry building [J]. Journal of Structural Engineering, 1994, 120(3): 925--947.
  • 5Priestley M J N. Seismic design of concrete masonry shearwalls [J]. ACI Journal, 1986, 83(1): 58--68.
  • 6谭素杰.抗震结构合理刚度的研究[D].哈尔滨工业大学.1997:39-48.
  • 7GB50011-2001,建筑抗震设计规范[s].第1版.北京:中国建筑工业出版社,2002:1-191.
  • 8Drysdale R G, Khattab M M. In-plane behavior of grout concrete masonry under biaxial. Tension-Compression [J]. ACI Structural Journal, 1995, 92(6): 653--664.
  • 9Narendra Taly.现代配筋砌体结构[M].周克荣,等,译.上海:同济大学出版社,2004:290--293.
  • 10孙国华,何若全,顾强,郁银泉,方有珍.半刚接钢框架内填RC墙结构侧移刚度分析[J].沈阳建筑大学学报(自然科学版),2011,27(4):613-620. 被引量:5

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部