摘要
本文初步探讨了不同的共混工艺过程对增韧效果的影响，结果表明，先把ABS和SAN共混，再加入PVC共混，增韧效果最佳，加工性能和热稳定性均有不同程度的提高。
In this paper, the effects of various blending technological processes on toughening re-sutls were investigated. The experimental results showed that the optimum was obtained by preblending ABS with the third component (SAN), then blending the mixture with PVC. In addition, the processability and heat stability were both increased in various degrees.
出处
《塑料》
CAS
CSCD
1992年第5期7-11,共5页
Plastics
基金
中国石化总公司资助项目
