期刊文献+

CaF_2负载H_3PMo_(12)O_(40)表面上激光促进甲烷部分氧化反应性能的研究 被引量:6

Studies on the Roles of Laser Stimulated Methane Partial Oxidation on the Surface of CaF_2 Supported H_3PMo_(12)O_ (40)
下载PDF
导出
摘要 Solid materials PMo 12 and PMo 12 /CaF 2 were prepared, and the surface structure, chemisorption to methane and the behavior of LSSR for the materials have been investigated by using IR, XRD, BET and laser stimulated surface reaction techniques. With different amounts of PMo 12 , the distribution of PMo 12 can be controlled from less than one layer to multi layer on the surface of CaF 2. There exist Lewis base sites O 2- in MoO and Mo—O—Mo bonds as well as Lewis acid site —Mo 6+ — on the solid surfaces. Methane can be adsorbed on the surface MoO and Mo—O—Mo bonds with the molecular adsorption state, and the adsorption amount on MoO bond is greater. With 960 cm -1 laser to excite the surface MoO bond, the partial oxidation of methane occurred obviously at normal pressure and 200 ℃. Methanol is the direct product of methane oxidation, while HCHO, CH 3OCH 3 and hydrocarbons are the products of methanol reacted continuously on the solid surface. As CaF 2 doesn’t adsorb 960 cm -1 laser, PMo 12 /CaF 2 can utilize the laser energy more efficiently than that of PMo 12 . According to the characterization and reaction results, a mechanism of LSSR for methane partial oxidation to methanol is given. Solid materials PMo 12 and PMo 12 /CaF 2 were prepared, and the surface structure, chemisorption to methane and the behavior of LSSR for the materials have been investigated by using IR, XRD, BET and laser stimulated surface reaction techniques. With different amounts of PMo 12 , the distribution of PMo 12 can be controlled from less than one layer to multi layer on the surface of CaF 2. There exist Lewis base sites O 2- in MoO and Mo—O—Mo bonds as well as Lewis acid site —Mo 6+ — on the solid surfaces. Methane can be adsorbed on the surface MoO and Mo—O—Mo bonds with the molecular adsorption state, and the adsorption amount on MoO bond is greater. With 960 cm -1 laser to excite the surface MoO bond, the partial oxidation of methane occurred obviously at normal pressure and 200 ℃. Methanol is the direct product of methane oxidation, while HCHO, CH 3OCH 3 and hydrocarbons are the products of methanol reacted continuously on the solid surface. As CaF 2 doesn't adsorb 960 cm -1 laser, PMo 12 /CaF 2 can utilize the laser energy more efficiently than that of PMo 12 . According to the characterization and reaction results, a mechanism of LSSR for methane partial oxidation to methanol is given.
作者 高峰 钟顺和
出处 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2001年第5期833-835,共3页 Chemical Journal of Chinese Universities
基金 国家自然科学基金! (批准号 :2 9773 0 3 1)资助
关键词 甲烷 部分氧化 甲醇 激光促进表面反应 磷钼酸 氟化钙负载催化剂 光催化合成 Methane Partial oxidation Methanol Heteropoly acid Laser stimulated surface reaction
  • 相关文献

参考文献2

二级参考文献7

共引文献19

同被引文献102

引证文献6

二级引证文献71

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部