期刊文献+

两层分采同抽井的测压技术及试井评价 被引量:1

Testing pressure technology of two-formation isolation and simultaneous pumping in well appraise in testing wells
下载PDF
导出
摘要 阐述了适用于两油层分采同抽井的测压技术 ,该技术应用于芳 2 4井 ,获得了该井的单层压力资料 ,通过关掉两泵之间的单流阀 ,直接或间接获得该井各分层的产液量 .利用常规的试井评价技术分析和计算 ,得到了该井各分层及合层的储层参数 ;利用单层及多层不稳定产能分析方法进行了产能预测 ,预测结果表明芳 2 4井仍具备一定的生产能力 ,可继续开采 .针对该井在给定流压下产量随时间递减的情况 ,提出了调整抽油井工作制度 ,适当降低日产油量的措施 ,有效地指导了该井的生产 . The new technology of pressure testing in wells of two\|formation isolation and simultaneous pumping is introduced. It overcame the disturbances between two formations, also gained single\|formation pressure data in two\|formation merge pumping well by applying the technology in “Fang\|24 well”. We gained output of single\|formations directly or indirectly by switching single\|valve between double\|pumps, and gained the parameters of single\|formation and multi\|formations by analysing and caculating of the advanced appraise technology in testing wells, and calculated the yield of oil\|well by analysing unstable yield of “Fang\|24 well”, and mine“Fang\|24 well” because the well also have producing\|ability. Owing to the output of the well decrease progressively by time at stable pressure, we adjusted the well work\|system that reduced the output of the well, and effectively controled the production of the well. The technology possess general appltion value in the well of two\|formation isolation and simultaneous pumping.
出处 《大庆石油学院学报》 CAS 北大核心 2001年第1期67-69,共3页 Journal of Daqing Petroleum Institute
基金 国家"九五"科技攻关项目 !(98科采油工程 11号 )
关键词 采油 两层分采 同步抽油 长期测压 分层产量 试井评价 two\|formation simultaneous pumping system long\|term test pressure single\|formation output testing well assessment
  • 相关文献

参考文献2

二级参考文献6

  • 1沈迪成 艾万诚.抽油泵[M].北京:石油工业出版社,1985.8-18.
  • 2王鸿勋 张琪.采油工艺原理[M].北京:石油工业出版社,1984.56-88.
  • 3沈迪成,抽油泵,1985年,8页
  • 4王鸿勋,采油工艺原理,1984年,56页
  • 5陈家琅,水力学,1980年,163页
  • 6()戈兰(Golan,Michael),惠策恩(Whitson,CurtisH.)著,陈钟祥等.油气井动态分析[M]石油工业出版社,1992.

共引文献15

同被引文献6

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部