期刊文献+

常温循环流化床烟气脱硫床料的扫描电镜分析

Investigation on the Bed Material of Circulating Fluidized Bed Flue Gas Desulfurization by a Scanning Electron Microscope
下载PDF
导出
摘要 用扫描电镜对循环流化床排烟脱硫实验装置的床料进行了分析研究 ,得出了床料的能谱图、床料中的元素百分含量以及床料的外观形貌。反应后床料硫含量的增加和反应后床料外缘所形成的一层氢氧化钙和硫酸盐膜说明流化床中的床料起了脱硫剂载体的作用 ,证实了循环流化床烟气脱硫装置中的脱硫反应。 An investigation has been performed on the bed material of circulating fluidized bed flue gas desulphurizer by a scanning electron microscope (SME).The energy spectrum,the element content and the appearance were obtained.In reacted bed material the sulfur content increased and the thin layer of hydroxide calcium as well as sulfate calcium formed around the solid particles.It signified that the bed material played the role of carrier of desulphurization and the desulphurization reaction took place in circulating fluidized bed.
出处 《环境科学研究》 EI CAS CSCD 北大核心 2001年第3期59-61,共3页 Research of Environmental Sciences
基金 国家重点基础研究专项经费资助!项目 (G 19990 2 2 2 )
关键词 排烟脱硫 常温循环流化床 床料 扫描电镜 烟气脱硫 flue gas desulphurization bed material of circulating fluidized bed SME
  • 相关文献

参考文献3

  • 1樊保国.循环流化床烟气脱硫技术的试验研究[M].北京:清华大学,1996..
  • 2樊保国,学位论文,1996年
  • 3廖乾初,扫描电镜原理及应用技术,1990年,142页

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部