期刊文献+

SrTiO_3基沿面放电电极材料配方优化 被引量:3

The Study on the SrTiO_3 Ceramic Electrode Material for Ozonizer
原文传递
导出
摘要 采用均匀设计法设计配方 ,研究了以SrTiO3 为基料 ,掺杂PbTiO3、TiO2 、CeO2 、Bi2 O3 对臭氧发生器用Sr TiO3 基陶瓷电极材料的介电常数、正切损耗、击穿电压、电阻率等电性能的影响。通过对实验结果进行回归分析表明了各掺杂料的比例与各电参数间的关系 ,其中Bi2 O3 含量对材料性能的影响最大。优化结果表明 ,为了获得U >10Kv/mm ,ε约 10 0左右 ,tgδ<0 0 1,ρ >10 10Ω的材料 ,最适合的掺杂配方是 :Bi2 O31 40 % ,TiO2 0 30 % ,PbTiO30 30 %和CeO2 0 5 0 % The experiment were arranged by the uniform design. It was studied that the effect of dopants on ozonizer electrod material. Through experimental data statistics and regression,the function relationship between the electrical properities, such as dielectric content, dielectric loss,breakdown voltage, electrical resistivity and content of BaTiO 3?CaSrTiO 5?TiO 2?ZnO?Bi 2O 3 was discuseed.The optimized results show that content of Bi 2O 3 is key factor and the fittest dopat is Bi 2O 3 1 40%?TiO 2 0 30%?CaSrTiO 5 0 30% ?BaTiO 5 0 50% and ZnO 0 52%?
出处 《计算机与应用化学》 CAS CSCD 北大核心 2001年第3期257-260,共4页 Computers and Applied Chemistry
基金 云南省教委自然科学研究基金资助项目 (编号 :9812 0 75 )
关键词 均匀设计 回归分析 陶瓷电极 钛酸锶 臭氧 制备 陶瓷沿面放电技术 放电电极 电极材料 配方氧化 uniform design, regression analysis, SrTiO 3, ceramic electrode
  • 相关文献

参考文献4

二级参考文献19

共引文献18

同被引文献8

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部