期刊文献+

火焰原子吸收光谱法测定高铝锌基合金中的镁

Determination of Magnesium in High-Aluminium Zinc-Base Alloy by Flame Atomic Absorption Spectrophotometry
下载PDF
导出
摘要 提出了用火焰原子吸收光谱法测定高铝锌基合金中镁的方法 ,在测定条件下 ,共存元素的干扰可消除 ,能测定高铝锌基合金中 0 .0 0 1%— 0 .0 1%范围内的镁。该方法相对标准偏差 <6% ,样品加标回收率为94 %— 10 2 %。 The concentration of magnesium in high\|aluminium zinc\|based alloy was determined by flame atomic absorption spectrophotometry.SrCl 2 was used to eliminate titanium,and Mg of which mass concentration is in the range of 0.001%—0.01% can be determined.The relative standard deviation of this method is less than 6% and the rate of recovery is in the range of 94%—102%.
作者 杜芳彦 周媛
出处 《光谱实验室》 CAS CSCD 2001年第3期385-387,共3页 Chinese Journal of Spectroscopy Laboratory
关键词 火焰原子吸收光谱法 高铝锌基合金 测定 FAAS,High\|Aluminium Zinc\|Based Alloy,Magnesium.
  • 相关文献

参考文献3

  • 1邓勃.原子吸收分光光度法[M].北京:清华大学出版社,1982.301-302.
  • 2穆家鹏(译),原子吸收分析方法手册,1989年,5页
  • 3邓勃,原子吸收分光光度法,1982年,301页

共引文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部