摘要
采用二氧化氯直接对制药厂含氰废水进行处理 ,当原水中氰 (以CN- 计 )浓度为 10 0～30 0mg/L时 ,处理效率可达 95%以上。该系统运行稳定可靠 ,操作安全方便 。
Chlorine Dioxide was adopted to treat raw wastewater contained cyanide discharged from pharmaceutical industry. In case when the cyanide (as CN -) level of raw wastewater was in range of 120～300 mg/L, a removal over 95% had been obtained. Due to its stable and reliable performance, this process is easy to operate and might be a new way to treat high concentrated wastewater contained cyanide.
出处
《给水排水》
CSCD
北大核心
2001年第6期37-39,共3页
Water & Wastewater Engineering
