摘要
本文用聚合物填料对SL用光敏树脂进行改性处理 ,研究了填料量对树脂粘度、密度、固化速度 ,以及对固态聚合物密度、线收缩、和体收缩的影响 ,并经激光快速成型机验证 。
The influence of polymer filler on the shrinkage of photocurable resin used for stereolithography is studied by measuring the viscosity、the specific gravity、the photocuring speed、the linear shrinkage,and the volume shrinkage of the resin containing polymer filler.The resin containing polymer filler is tested on Laser Rapid Prototyping Manufacturing System,and the result indicate that the resin containing polymer filler can reduce the shrinkage of the photocurable resin for stereolithography.
出处
《材料科学与工程》
CAS
CSCD
北大核心
2001年第2期39-42,共4页
Materials Science and Engineering
基金
西安交通大学机械结构强度与振动国家重点实验室访问学者基金资助
