期刊文献+

蠕变对PE80管材焊缝裂尖应力奇性的影响 被引量:5

Effect of Creep on the Crack Tip Stress Singularity in the Weld of PE 80 Pipe
下载PDF
导出
摘要 具有优良的耐寒、耐蚀和很好抗开裂性的聚乙烯 (PE)管材在压力管道领域已得到广泛应用。评价这种粘弹性的PE管材的承载性能时需要考虑蠕变的影响。本文测定了燃气用PE80管材热板焊接接头的蠕变柔量 ,研究了蠕变对焊缝裂尖应力场的影响。结果表明在外载恒定的情况下 ,蠕变的发展会使焊缝裂尖的应力奇性增加 。 Polyethylene pipes, which are of good cold-resistance, corrosion-resistance and crack-resistance, have been widely used in the field of pressure pipe. When the load-carrying performances of these visco- elastic PE pipes are evaluated, the influences of creep have to be studied. In this paper, the creep compliance of Hot-plate welded joint of PE80 pipe is measured, and the effect of creep on the crack tip stress field in the weld is investigated. Results show that the development of creep makes the crack tip stress singularity in the weld and the driving force for crack growth increased.
出处 《压力容器》 2001年第3期31-33,共3页 Pressure Vessel Technology
  • 相关文献

参考文献2

二级参考文献20

共引文献22

同被引文献47

  • 1王欣,魏若奇.聚乙烯管材快速评价法[J].塑料科技,1993,21(3):39-42. 被引量:1
  • 2王建平,霍立兴,谷侃锋.高密度聚乙烯塑料压力管道热板焊接头应力分布有限元分析[J].压力容器,2005,22(4):13-16. 被引量:4
  • 3王卉,郑津洋,郭伟灿,方晓斌,丁良玉,寇官祥,Hyeon Jae SHIN,施建峰.聚乙烯管道电熔焊接接头的超声检测[J].压力容器,2007,24(5):45-49. 被引量:27
  • 4芦凤桂.燃气用埋地聚乙烯管材焊缝缓慢裂纹扩展特性的研究[M].天津大学,2001..
  • 5孙逊.聚烯烃管道[M].北京:化学工业出版社,2006:264-318.
  • 6GB15558.1-2003.燃气用埋地聚乙烯(PE)管道系统第1部分:管材[s].
  • 7[苏]卡加.塑料管道[M].北京:国防工业出版社,1985..
  • 8ISO 13953:2001. Polyethylene(PE) pipes and fittings-Determination of the tensile strength and failure mode of test pieces from a butt-fused joint.
  • 9BS EN 12814-3:2000. Testing of welded joints of thermoplastics semifinished products-Part 3:Tensile creep test.
  • 10BS EN 12814-6:2000. Testing of welded joints of thermoplastics semi- finished products-Part 6:Low temperature tensile test.

引证文献5

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部