摘要
对 1Cr18Ni9Ti不锈钢进行菱形应变路径的非比例循环本构实验 .根据实验结果及分析 ,对双面本构模型给出了一个极限面定义 ,以保证屈服面不与极限面相交 .在这个极限面定义及实验结果的基础上 ,对不同本构模型所定义的距离与塑性模量的相关性进行了讨论 ,表明Mr幃ｚ和Ｃｈｅｎ的距离与塑性腁坑薪虾玫南喙匦?.
A nonproportional cyclic constitutive experiment was conducted on 1Cr18Ni9Ti stainless steel under rhombic strain path. Based on the experimental results and data analysis, a definition of limit surface is proposed in order that yield surface does not intersect with limit surface in two surface plasticity model. Then, the relation of plasticity modulus and distances defined in different models were discussed. It showed that the Mrózs and Chens distances had a good correlation with the plasticity modulus.
出处
《固体力学学报》
CAS
CSCD
北大核心
2001年第2期186-190,共5页
Chinese Journal of Solid Mechanics
基金
国家自然科学基金 (19872 0 49)资助课题
关键词
双面模型
塑性模量
非比例载荷
循环塑性
本构模型
材料
two surface plasticity model, plasticity modulus, nonproportional loading, cyclic plasticity, constitutive model
