期刊文献+

Ni-20Cr-10Mo-10Co高温合金的相分析 被引量:5

Ni-20Cr-10Mo-10Co SUPERALLOY PHASE ANALYSIS
下载PDF
导出
摘要 Ni 2 0Cr 10Mo 10Co高温合金是以碳化物为主要强化相的一种铸造高温合金 ,用X射线衍射与扫描电镜的背散射象及能谱分析确定了该合金的相组成 ,即基体为Ni Mo Cr Co的固溶体 ,及 (Cr ,Mo ,Co ,Ni) 2 3C6和 (Mo ,Cr ,Co ,Ni) Ni 20Cr 10Mo 10Co superalloy is a cast superalloy strenghened by carbides. The phases in the alloy were determined by X ray diffraction and scanning electron microscopy with backscatter electrons and energy spectrum analysis. The microstructure in Ni Mo Co Cr solid solution and carbides (Cr, Mo, Co, Ni) 23 C 6 and (Mo, Cr, Co, Ni) 6C.
出处 《理化检验(物理分册)》 CAS 2001年第5期185-187,共3页 Physical Testing and Chemical Analysis(Part A:Physical Testing)
基金 国家重点基础研究专项经费资助!No19990 6 5 0
关键词 高温合金 相分析 背散射电子像 碳化物 点阵常数 Ni-20Cr-10Mo-10Co 能谱分析 飞机发动机 Superalloy Phase analysis Backscatter electrons picture Carbide Lattice constants
  • 相关文献

同被引文献10

  • 1蔡玉林,郑运荣.高温合金金相研究[M].冶金工业出版社,1986.
  • 2Marian Raczka, Effect of carbon content on the microstructure and properties of silicon carbide-based sinters, Materials Characterization, 46(2001) : 155 - 161.
  • 3蔡玉林 郑运荣.高温合金金相研究[M].北京:冶金工业出版社,1986.26-39.
  • 4Joseph I Goldstein.Scanning Electron Microscopy and X-pay Microanalysis[M].NewYork: Plenum press, 1981.10-33.
  • 5Kramer L D,Randolph D.Physical metallurgy and materials science[M].ASME-MPC Symposium on Creep-Fatigue Interaction,1976.2329-2331.
  • 6Bressers J. Creep and Fatigne is high Temperature alloy[M]. London:Applied Science,1981.35-32.
  • 7《高温合金(冶金学和生产)》编写组.高温合金-冶金学和生产[M].上海:上海科学技术文献出版社,1980.78-80.
  • 8GB/T13221-91超细粉末粒度分布的测定:X-射线小角散射法[S].
  • 9贾崇林,顾家琳.铸模温度对C242合金高温持久性能的影响[J].金属材料研究,2000,26(4):16-20. 被引量:3
  • 10关小军,李阳,周家娟,刘江,周兰聚.09CuPTiRE钢板中析出物的透射电镜研究[J].材料科学与工程学报,2003,21(4):479-481. 被引量:4

引证文献5

二级引证文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部