期刊文献+

添加元素对Zr_(1-x)Ti_x(NiCoMnV)_(2.1)电极性能的影响 被引量:2

Effect of Additive Elements on the Performance of the Zr_(1-x)Ti_x(NiCoMnV)_(2.1) Hydrogen Alloy Electrode
下载PDF
导出
摘要 通过添加不同的导电剂和添加剂,制备了Zr1(xTix-NiCoMnV)2.1贮氢合金负极片,测试了不同负极片的放电容量. 结果表明:以镍粉为导电剂的Zr1(xTix-NiCoMnV)2.1负极片性能明显高于以碳黑为导电剂的负极片, 添加银粉的负极片初始容量能达到215 mA(h/g,平台K值大于90%. Zr1(xTix(NiCoMnV)2.1 hydrogen alloy electrodes are prepared by adding different conductors, binders and additives. The discharging capacity is tested for each electrode. The results show that the properties of the Zr1(xTix(NiCoMnV)2.1 hydrogen alloy electrode with nickel conductor are apparently better than that of the electrode with carbon black. The electrode with nickel conductor and Ag additive is the best, the first time discharging capacity of this electrode can be up to 215 mA(h/g, and plateau value is about 90%.
出处 《过程工程学报》 CAS CSCD 北大核心 2001年第2期208-210,共3页 The Chinese Journal of Process Engineering
基金 国家863计划资助项目!(编号:715-004-0233)
关键词 Zr1-xTix(NiCoMnV)2.1负极片 贮氢合金 放电容量 电极 性能 电池 Zr1(xTix(NiCoMnV)2.1 hydrogen alloy electrode hydrogen storage alloy discharging capacity
  • 相关文献

参考文献1

二级参考文献3

共引文献24

同被引文献21

  • 1Hong K. [J]. J Alloy and Comp, 2001, 321: 307- 313
  • 2Lee S M, Lee H, Kim J H, et al. [J]. J Alloy and Comp, 2000, 308: 259-269.
  • 3Li Z P, Higuchi E, Liu B H, et al. [J]. J Alloy and Comp, 1999, 293-295: 593-600.
  • 4Visintin A, Peretti H A, Tori C A, et al. [J]. International J Hydrogen Energy, 2001, 26: 683-689.
  • 5Shu K Y, Zhang S K, Lei Y Q, et al. [J]. J Alloys Compd, 2003, 349: 237-241.
  • 6Du Y L, Yang X C, Zhang Q A, et al. [J] . International J Hydrogen Energy, 2001, 26: 333-337.
  • 7Kim J S, Paik C H, Cho W I, et al. [J]. J Power Sources, 1998, 75: 1-8.
  • 8Li R, Pan H, Gao M X, et al. [J]. J Alloys Comps, 2007, 432: 183-188.
  • 9Sun K, Guo X M, Wu E D, et al. [J]. Physica B, 2006, 385: 137-140.
  • 10Hong K. J Alloy and Comp[J],2001, 321:307

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部