期刊文献+

宽带双圆锥取样器的研制

The Study and Manufacture of the wide-band Biconical Sampler
下载PDF
导出
摘要 本文对双圆锥型取样器进行了理论分析,提出了这种取样器的设计方法和全套计算公式,并据此进行了实际的工程设计。经过加工、安装、实验调整和测试,该取样器的带宽为0~12.4GHz;带宽内灵敏度平坦,小于3dB;驻波系数小于2.2.说明本文提出的理论分析,设计方法和计算公式是正确的,制做的取样器的性能是优良的。 The theoretical analysis and a complete set of formulas for designingbiconical sampler are given in this paper. On the basis of these formulasand principles, a biconical sampler has been successfully designed, assembledand tested. That bandwidth of this sampler is from O to 12.4GHz. Thesampling sensitivity is flat within its bandwidth, with a slight decreaseof less than 3dB at the upper frequency end. The standing wave ratiois less than 2.2 over the bandwidth. The experimental data show thatthis sampler possesses a good performance.
作者 杨庆德
出处 《兰州大学学报(自然科学版)》 CAS CSCD 北大核心 1991年第3期48-52,共5页 Journal of Lanzhou University(Natural Sciences)
关键词 取样器 双圆锥型 biconical sampler theoretical analysis designs--formulas experimental data performance
  • 相关文献

参考文献3

  • 1刘文生,取样技术原理与应用,1981年
  • 2甘本祓,现代微波滤波器的结构与设计,1974年
  • 3陈进光,公寸波技术,1958年

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部