摘要
以阿拉伯胶和明胶为壁材的凝聚法生产茶油微胶囊的工艺过程及条件如下 :5 %阿拉伯胶和 5 %明胶与一定量油茶籽油在 6 0℃下乳化 1min,在 p H4.4下凝聚 0 .5 h,10℃下固化 1h,经离心和真空干燥即可 .该法制备的微胶囊 ,有较高的含油率和包埋率 .其粒径与凝聚时的搅拌速度密切相关 ,但其水溶性较差 .
The polymeric micro-encapsulation of oil-tea camellia seed oil(OCSO) by using gelatin and gum Arabic as wall material was prepared as the following technical flow shows: emulsifying 5% of gelatin, 5% of gum Arabic and some OCSO at 60℃ for 1 min; condensed at pH 4.0~4.5 for 0.5 h; solidified at 10℃ for 1h; centrifugalized and dried in a vacuum drying box. This microcapsule has high oil retention and oil content, but the solubility in water was low. The diameter of microcapsule is closely related to the stirring speed during condensation.
出处
《中南林学院学报》
CSCD
2001年第4期28-31,共4页
Journal of Central South Forestry University
基金
国家林业局重点科研项目"油茶高产栽培及深度加工利用技术研究"( 96 -0 3)的部分内容
关键词
油茶籽油
微胶囊
凝聚法
工艺技术
生产工艺
茶油
oil-tea camellia seed oil
polymeric micro-encapsulation
technical flow