期刊文献+

贝氏体型非调质钢SBL的连续冷却转变 被引量:4

Continuous Cooling Transformation of Bainitic Non-Quench-Tempering Steel SBL
下载PDF
导出
摘要 研究获得了Mn B系低碳贝氏体型非调质钢SBL热变形奥氏体的连续冷却转变曲线。试验结果表明 ,本试验用钢热变形奥氏体不发生先共析铁素体析出临界冷却速度为 1.5℃ s ;冷却速度在 1.5~ 7℃ s范围内可得到贝氏体组织 ;当冷速大于 7℃ s时 ,不再有贝氏体生成 ,室温组织为马氏体和残余奥氏体。 The continuous cooling transformation (CCT) diagram for hot deformed austenite of the Mn\|B bainitic non\|quench\|tempering steel SBL has been studied and obtained. The results showed that in hot deformed austenite of tested steel, there was not proeutectoid ferrite precipitated with the critical cooling rate 1.5 ℃/s, the structure of whole bainite could be obtained with cooling rate from 1.5 ℃/s to 7℃/s, and with the cooling rate more than 7 ℃/s, the structure of martensite and residual austenite was obtained at ambient temperature.
出处 《特殊钢》 北大核心 2001年第5期19-20,共2页 Special Steel
关键词 非调质钢 热变形 连续冷却转变 贝氏体 抽油杆 Non\|Quench\|Tempering Steel, Hot deformation, CCT, Bainite
  • 相关文献

参考文献1

  • 1方鸿生 郑燕康.我国贝氏体钢的前景-走向二十一世纪的新材料[M].清华大学材料系,1996.303.

同被引文献34

引证文献4

二级引证文献55

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部