期刊文献+

热轧终轧温度对冷轧无取向电工钢析出物的影响 被引量:10

Effect of Finishing Temperature in Hot-Rolling on Precipitates in Non-Oriented Electrical Steel
下载PDF
导出
摘要 研究了热轧终轧温度对低碳低硅无取向电工钢热轧带中第二相析出物的影响。结果发现 ,在高温γ相区终轧卷取后 ,析出物的直径较大 ,析出物体积分数较高 ;在α+γ两相区终轧卷取后 ,析出物的直径也较大 ,但析出物体积分数较小 ;在α相区终轧卷取后 ,析出物的直径较小 。 The precipitation under various hot rolling schedule was investigated in details. The results showed both the amount and size of precipitates are large in the hot rolled band which rolling is finished within γ phase region, while there are less and smaller precipitates in hot rolled bands which rolling is finished within α phase region. For the bands, which rolling is finished within α+γ phase region, the precipitates are large but the amount is lower.
出处 《钢铁研究学报》 CAS CSCD 北大核心 2002年第1期34-37,共4页 Journal of Iron and Steel Research
关键词 无取向电工钢 热轧 析出物 终轧温度 冷轧 non oriented electrical steel hot rolling precipitate
  • 相关文献

参考文献4

  • 1彼里西阿 孙惠林(译).体视学和定量金相学[M].北京:机械工业出版社,1980..
  • 2王峻.热轧工艺对冷轧无取向电工钢组织结构和性能的影响[M].北京:清华大学,1999..
  • 3科恩 李述创(译).钢的微合金化和控制轧制[M].北京:冶金工业出版社,1984..
  • 4雍岐龙 马鸣图 等.微合金钢[M].北京:机械工业出版社,1989..

共引文献3

同被引文献45

引证文献10

二级引证文献64

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部