期刊文献+

火焰管缩口工艺研究 被引量:3

Research of Necking Technology for the Flame Pipe
下载PDF
导出
摘要 分析了火焰管缩口的变形特点。确定了缩口次数并计算了管坯尺寸和缩口力。 The deformation characteristic of the flame pipe necking was analyzed.The necking numbers were determined.The pipe blank dimensions and the necking force were calculated.The structure of necking die for the flame pipe was introduced.
出处 《金属成形工艺》 2001年第5期48-50,52,共4页 Metal Forming Technology
关键词 火焰管 缩口工艺 缩口力 模具结构 冲床 旋压 flame pipe necking technology necking force die structure
  • 相关文献

参考文献1

  • 1冲压工艺及冲模设计编写委员会.冲压工艺及冲模设计[M].北京:国防工业出版社,1993..

共引文献8

同被引文献9

  • 1《冲模设计手册》编写组编著.冲模设计手册[M].北京机械工业出版社,1988..
  • 2孙缜和.兵器冷冲工艺与模具设计[M].北京:兵器工业出版社,1993..
  • 3肖景答.板料冲压[M].武汉:华中工学院出版社,1986..
  • 4Hwing S M, Kobayashi S. Preform design in plane-strain rolling by the fmiteelement method [J] . International Journal of machine Tool Design and Research. 1989, 24 (4): 253 - 266.
  • 5Naksoo Kim Kobayashi S. Preform design in H-shaped cross sectional axisyminerric forging by the finite dement method [J]. International Journal of Machine Tools and Manufacture,1990, 30 (2): 243-268. 1990.
  • 6Park J J, NuNo Rebelo, Shiro kobayashi. A new approach to preform design in metal forming with the finite element method[J] . International Journal of Machine Tool Design and Research. 1983, 23 (1) : 71- 79.
  • 7Shiro kobayashi. Approximate solutions for preform design in shell nosing [J]. Approximate Solutions for perform in rolling[J] . International Journal of Machine Tool Design and Research, 1983, 23(2-3): 111-222; 1984, 24 (3): 215-224.
  • 8刘晓冰.壳体缩口工艺及模具[J].模具技术,2001(2):49-51. 被引量:3
  • 9邱晓刚,卢国清,陈文龙,骆中云.板材成形有限元仿真技术的应用[J].钢铁钒钛,2003,24(1):54-60. 被引量:8

引证文献3

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部