期刊文献+

连铸盛钢桶到中间罐注流吸氧速率的预报模型

Prediction Model for Oxygen Pick-up Rate of Teeming stream from Ladle to Tundish During Concasting
原文传递
导出
摘要 根据传输理论建立注流吸氧预报模型 ,定量地计算连铸过程中盛钢桶到中间罐注流吸氧速率。结合生产试验数据对理论模型计算的结果进行分析和讨论。建立的预报模型很好地预测注流的吸氧速率 。 The oxygen pick-up rate of the teeming stream from the ladle to the tundish during the continous casting is quantitatively calculated using a prediction model built up according to the transfer theory.The results of the theoretical calculation by the model are analyzed and discussed in comparison with the experimental data.The newly built model has laid a sound theoretical foundation for prevention against the reoxidation of the liquid steel during the continuous casting since it can very effectively predict the oxygen pick-up rate of the falling steam.
作者 吴伟 张华书
机构地区 东北大学
出处 《炼钢》 CAS 北大核心 2002年第1期41-43,共3页 Steelmaking
关键词 连铸 注流 吸氧速率 预报模型 盛钢桶 中间罐 二次氧化 continuous casting stream oxygen pick-up rate prediction model
  • 相关文献

参考文献4

  • 1董金生,金大中,黄尊贤,裴云毅,蔡开科,姚春利,韩传基,刘新华.转炉—RH—连铸工艺过程中低碳铝镇静钢的清洁度[J].钢铁研究学报,1996,8(3):1-4. 被引量:7
  • 2S Armstrong.tundish Practics for improved Steel Cleanliness at Weirton Steel.Iron & Steelmaker,1993(1):49~52
  • 3Temi,W M Boorstein et al.Absorption of Gaseous Oxygen by Liquid Iron.Metal Irons,1974(5):1959~1966
  • 4K Sasai and Y Miiukami,Effects of Tundish Cover Powder and Teeming Stream On Oxidation Rate of Molten Steel in Tundish,ISIJ Intermational,1998(4):332~338

二级参考文献1

  • 1蔡开科,浇铸与凝固,1987年

共引文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部