期刊文献+

Sn与Be对AlSiMg轮毂材料时效过程的影响 被引量:1

Effect of Sn and Be on the Ageing Process of Wheel
下载PDF
导出
摘要 Sn对AlSiMg系合金的时效过程产生明显的影响,合金中加入Sn,若不进行时效处理,Sn作为夹杂降低合金的力学性能;若进行时效处理,Sn抑制Mg2Si沉淀相的聚集、长大,从而使其呈弥散状分布,因而合金的力学性能有较大幅度的提高。通过时效,合金的抗拉强度和伸长率可分别达到271.34MPa和4.21%。同时发现Be对铝合金中Fe的影响很大,当Be的加入量为0.03%时,时效后合金的伸长率与抗拉强度为最好。 Sn has strong effect on the ageing of AlSiMg alloy.Sn can weaken the strength of the alloy as inclusions without ageing,while with ageing Sn can increase the strength of the alloy by stop the growth and segregation of Mg 2 Si ,resulting in dispersoid.By ageing,the ultra-strength and elongation are up to271.34MPa and4.21%.In addition,the effect of Be is very apparent on the Fe phase in the alloy,obtaining the maximum of ultra-strength and elongation after ageing with addition of0.03%Be.
出处 《轻合金加工技术》 CAS 2002年第1期46-49,共4页 Light Alloy Fabrication Technology
关键词 时效处理 力学性能 轿车 摩托车 轮毂 铝合金 Sn Be AlSiMg alloy ageing mechanical property
  • 相关文献

参考文献3

二级参考文献1

  • 1袁鸽成,硕士学位论文,1990年

共引文献22

同被引文献5

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部