摘要
提出了一种新型电镀珠光镍工艺，其特点是镀液稳定，处理周期长。同时考察了各种工艺条件对镀层外观形貌的影响。采用自行研制的珠光镍添加剂，在工艺范围内可以得到外观均匀、镀层柔软性好的珠光镍。ＳＥＭ观察结果表明镀层表面形貌不同于传统珍珠镍电镀工艺所得镀层。
A new electroplating technology was developed for satin nickel without cloud point, which was characterized as stable and long-life plating solution by eliminating the occurrence of cloud point with old surfactants. The effects of bath compositions and technological parameters on the coating appearance had been studied. The uniform and soft satin nickel coating was obtained in technology area with self-made additives. The morphology of satin nickel coating with the additives was distinguished to other traditional process observed by SEM.
出处
《材料保护》
CAS
CSCD
北大核心
2002年第1期21-23,共3页
Materials Protection
关键词
电镀
珠光镍
添加剂
浊点
镀镍
工艺
electroplating
satin nickel
additives
cloud point
