期刊文献+

新型无腐蚀性铝钎剂 被引量:3

A new type of non-corrosive aluminum brazing flux
下载PDF
导出
摘要 研究并配制了新型无腐蚀性铝钎剂。结果表明:新配制的无腐蚀性铝钎剂与氯化物钎剂相比,有不吸潮、保持活性时间长、钎缝无任何焊接缺陷、焊后不需要清洗等优点;与氟化物共晶型钎剂相比,有熔点低、流动性好、制备方便等优点。 A new type of non-corrosive brazing flux has been studied. It shows that the new type of non-corrosive aluminum brazing flux, comparing with the chloride salt flux, has many advantages, moisture absorption free , long active time , producing sound brazing joint and without the need of postbraze cleaning. Comparing with fluoride eutectic fluxes, it possesses the advantages as : low melting temperature, good wetting ability, easy to prepare, etc.
作者 刘星 温瑾林
出处 《沈阳工业大学学报》 EI CAS 1991年第3期51-60,共10页 Journal of Shenyang University of Technology
关键词 钎焊 钎剂 无腐蚀性 braze welding aluminium fluxes
  • 相关文献

参考文献1

  • 1张启运,郑朝贵,刘淑祺.高温铝钎剂的选择[J]金属学报,1979(01).

同被引文献14

  • 1舒震,刘金水,袁斌,张福全.提高高铝锌合金高温性能及耐磨性的研究[J].湖南大学学报(自然科学版),1995,22(4):70-76. 被引量:10
  • 2Whiting L V. Foundry characteristics of sand cast Zn-Al alloys[J]. Transactions of AFS,1984,92:861-870.
  • 3Saiz E, Tomsin A P, Cannon R M. Ridging effects on metting and spreading of liquids on solids[J]. Acta Mater,1998,46(7):2249-2361.
  • 4Phil Robert. A fresh look at low temperature silver brazing-part 2: Joint design[J]. Welding and Metal Fabrication,1997,(2):14-26.
  • 5Pavt Vianco. Determining and mechanical strength of soldering joints[J]. Welding Journal,1998,(10):45-52.
  • 6张启运 庄鸿寿.钎焊手册[M].北京:机械工业出版社,1998..
  • 7胡塞育.发展中的ZA合金及其应用[J].机械工程材料,1988,12(4):4-8.
  • 8Suzuki K, Miura F, Shimizu F. Brazing flux:USA,US4670067 A [P]. 1987-06-02.
  • 9陈荣,高苏,张启运.中温铝钎剂相关三元熔盐体系研究[C]//第十届全国相图学术会议论文集.北京:中国物理学会相图专业委员会.2000.
  • 10蔡志红,贺军四,杨占红,刘宏江.中温氟铝酸盐铝钎剂的研究现状和发展趋势[J].焊接技术,2009,38(1):3-6. 被引量:10

引证文献3

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部