期刊文献+

汽轮发电机组框架式基础模型的模态试验研究 被引量:11

Research on Model Test of Frame Foundation Model for Steam Turbine-Generator Set
下载PDF
导出
摘要 采用模型模态试验方法对汽轮发电机组框架式基础的振动特性进行了研究。根据相似理论建立了某电厂 60 0 MW大型汽轮发电机组框架式基础的 2 0∶ 1模型 ,采用锤击法对该结构进行了三维模态分析 ,并将试验结果同 ALGOR FEAS有限元软件分析结果作了比较 ,两者很好地吻合 ,表明理论分析模型的可行性 ,研究结果将为采用理论方法分析汽轮发电机组框架式基础的振动特性提供依据。图 4参 In this paper, the vibration characteristics of frame foundation for steam turbine generator set is performed by model modal test method. A model (scale is 20∶1) of frame foundation for a 600MW steam turbine generator set is built according to similarity theory, then the three dimensional modal analysis is carried out by hammering method. The results are compared with the theoretical results which are calculated by ALGOR FEAS. The comparation proves that they are very consistent, so theoretical method is reliable in analyzing the vibration characteristics of frame foundation for steam turbine generator set.
出处 《动力工程》 CSCD 北大核心 2001年第6期1523-1527,共5页 Power Engineering
基金 国家"九五"攀登计划预选项目 (编号 :PD95 2 190 5 )
关键词 框架式基础 锤击法 模态试验 汽轮发电机组 模型 frame foundation hammering method modal test
  • 相关文献

参考文献2

二级参考文献10

  • 1李杰 李国强.地震工程学导论[M].北京:地震出版社,1994..
  • 2李国强.多层及高层钢框架结构在双向水平地震作用下的弹塑性平扭耦合动力反应分析.同济大学博士学位论文[M].,1988..
  • 3朱以文.ALGOR FEAS软件的分析计算模块数据文件格式[M].水电部天津勘测设计院,1991..
  • 4李杰,地震工程学导论,1994年
  • 5方鄂华,多层及高层建筑结构设计,1992年
  • 6朱以文,ALGORFEAS软件的分析计算模块数据文件格式,1991年
  • 7朱伯龙,结构抗震试验,1989年
  • 8李国强,博士学位论文,1988年
  • 9张令弥.机械阻抗方法在振动分析中的应用 Ⅰ 关于振动分析与机械阻抗方法[J]机械强度,1980(02).
  • 10陈佐一,文风.大功率汽轮机组在小流量下的颤振预估[J].中国电机工程学报,1986,7(5). 被引量:3

共引文献22

同被引文献56

引证文献11

二级引证文献31

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部