期刊文献+

动态分析方法在带式输送机设计中的作用 被引量:6

下载PDF
导出
摘要 从分析标准带式输送机设计方法存在的问题入手,回顾了带式输送机动态设计研究的发展过程,并介绍了作者开发的带式输送机动态分析软件BCD.10及其应用情况,通过采用动态分析方法解决实际设计问题的实例分析,说明动态分析方法是带式输送机设计的必备手段,通过动态分析方法改进设计,不仅能避免事故的发生,也能提高设备的经济性。
作者 宋伟刚
出处 《起重运输机械》 北大核心 2001年第B11期36-46,共11页 Hoisting and Conveying Machinery
  • 相关文献

参考文献17

  • 1宋伟刚.带式输送机动态分析软件.沈阳:东北大学机械工程学院,1996.
  • 2宋伟刚,邓永胜,彭兆行,王恩光.大型带式输送机起动过程的仿真[J].东北大学学报(自然科学版),1998,19(3):312-315. 被引量:20
  • 3DIN22101 Belt Conveyors for Bulk Materials,1982.
  • 4International Standard ISO5048 Continuous Mechanical Handling Equipment (First Edition).1979.
  • 5CEMA(USA)Belt Conveyors for Bulk Materials(Second Edition).1979.
  • 6北京起重运输机械研究所.DTⅡ型固定式带式输送机设计选用手册.北京:冶金工业出版社,1994.
  • 7ДАНКРАТОВ С А,КЕЛЕН O N.OПРЕДЕЛЕНИ.ЧАСТОТН ЫХ ХАРАКТЕРИСТИК КОЛЕЬАНИЙ ЛЕНТОЧНЫХ КОНВЕЙЕРОВ В ЭАВИОТСТИ ОТ МЕСТА РАС ПОЖНИЯ ПРИВОДНОГО БАРАБАНА ИЭВ.ГОРНЫЙ ЖУРНАЛ,1964,(9):113-120.
  • 8ДМИТРИЕВ.胶带输送机结构原理与计算(上册).杨复兴编译.北京:煤炭工业出版社,1983.
  • 9Funke H.Zum dynamischen verhalten von Forderbandanlagen beim Anfahren und stillsetzen unter Berueksichtigung der Bewegungswiderstande.Dissertation TU Hanover,1973.
  • 10Harrison A,Roberts A W.Technical Requirements for Operating Conveyor Belts at High Speed.Bulk Solids Handling,1984,4(1).

二级参考文献3

共引文献19

同被引文献21

  • 1朴香兰,王国强,岳彦炯.带式输送机动态分析及软件进展研究[J].中国矿业,2007,16(7):64-67. 被引量:12
  • 2张嘉善.胶带输送机技术发展情况.山东矿业学院学报,1993,12(5).
  • 3Funke H. Zum dynamischen verhalten von Forderbandanlagen beim Anfahren und stillsetzen unter Berueksichtigung der Bewegungswiderstande[D].Hannover:TU Hannover, 1973
  • 4Funke H, Hartmann K, Lauhoff H. Design and Operating Performance of a Long-Distance Belt Conveyor System with Horizontal Curves and Simultaneous Material Transport in the Upper and Lower Strands[J]. Bulk Solids Handling, 2000, 20 (1): 45-55
  • 5Harrison A. Belt Conveyor Research 1980~2000[J]. Bulk Solids Handling, 2001, 21 (2): 159-164
  • 6Harrison A, Roberts A W. Technical Requirements for Operating Conveyor Belts at High Speed[J]. Bulk Solids Handling, 1984, 4(1): 99-104
  • 7Nordell L K. The channel 20 km overland-A Flagship of Modern Belt Conveyor Technology[J]. Bulk Solids Handling, 1991, 11 (4): 781-792
  • 8Nordell L K, Ciozada Z P. Transient Belt Stresses During Starting and Stopping; Elastic Response Simulated by Finite Element Method[J]. Bulk Solids Handling, 1984, 4(1):93-98
  • 9Lodewijks G. Non-Linear Dynamics of Belt Conveyor Systems.Bulk Solids Handling, 1997, 17(1): 57-67
  • 10Zur T W. Viscoelastic Properties of Conveyor Belts Modelling of Vibration Phenomena in Belt Conveyors During Starting and Stopping[J]. Bulk Solids Handling, 1986, 6(3): 553-560

引证文献6

二级引证文献116

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部