期刊文献+

面向需求不确定的混装线物流车辆配送区域划分方法 被引量:2

Regional distribution of logistics vehicles in mixed-model assembly line geared to uncertain demands
下载PDF
导出
摘要 静态的物流车辆调度方案难以适应需求不确定引起的混流装配线物料需求动态变化,导致配送效率低下,甚至生产流程紊乱等问题。针对此问题,提出了一种面向需求不确定的混流装配线物流车辆配送区域划分方法。首先,分析需求不确定对物流车辆配送量的影响,提出了基于信息熵的配送任务复杂性测度方法。其次,在复杂性测度的基础上,建立以物流配送车辆满载率最大、配送任务复杂度最小为目标的调度优化模型。最后,在实例中应用遗传算法对调度优化模型进行求解,得出物流车辆配送区域最优划分方案。结果表明,所提方法能够输出适应需求不确定的物流车辆配送区域划分方案,满足需求变化的同时,保证车辆满载率维持在最高水平,并降低配送任务复杂度,减少配送错误发生率。 It is difficult for static scheduling solutions of logistics vehicles to adapt to the ever-changing material requirements for the mixed-model assembly line caused by uncertain demands,which has led to the low efficiency of distribution and even the production disorder.To this end,a method is set forth for the regional distribution of logistics vehi'cles in the mixedmodel assembly line geared to uncertain demands.Firstly,the analysis is conducted on the influence of uncertain demands upon the distribution volume of logistics vehicles;the method of complexity measurement of distribution tasks is proposed based on information entropy.Secondly,with the aid of complexity measurement,the optimized scheduling model is set up,which pursues the maximum capacity rate of logistics vehicles and the minimum complexity of distribution tasks.Finally,the genetic algorithm is employed to solve the scheduling model by means of some examples;the optimized scheme of regional distribution of logistics vehicles is obtained.The results show that by means of the proposed method,the reasonable scheme of regional distribution of logistics vehicles geared to uncertain demands is formulated,while ensuring the highest capacity rate of vehicles.It can also reduce the complexity of distribution tasks and the number of incidence of distribution errors.
作者 范国良 李爱平 徐立云 刘琨 李钰 FAN Guo-liang;LI Ai-ping;XU Li-yun;LIU Kun;LI Yu(Sehool of Mechanieal Engineering,Tongji University,Shanghai 201804)
出处 《机械设计》 CSCD 北大核心 2018年第11期10-16,共7页 Journal of Machine Design
基金 国家高档数控机床与基础制造装备科技重大专项资助项目(2013ZX04012-071) 上海市科委(上海市科技成果转化和产业化)资助项目(15111105500)
关键词 需求不确定性 混流装配线 物流车辆 配送区域 复杂度 uncertain demand mixed-model assembly line logistics vehicle regional distribution complexity
  • 相关文献

参考文献2

二级参考文献16

  • 1理查德B·蔡斯.生产与运作管理[M].机械工业出版社,1998..
  • 2齐二石.大批量生产机械制造企业物流系统优化分析初探.天津大学硕士论文[M].,1985..
  • 3Ana Sofia Simaria, Pedro M, Vilarinho. A genetic algorithm based approach to the mixed-model assembly line balancing problem of type Ⅱ [J]. Computers & Industrial Engineering, 2004, 47(4) : 391 - 407.
  • 4Joseph Bukchin, Ezey M Dar-EI, Jacob Rubinovitz. Mixed model assembly line design in a make-to-order environment[ J]. Computers & Industrial Engineering, 2002, 41 (4): 405 -421.
  • 5Leu YY, Matheson A L, Rees L P. Sequencing mixed model assembly lines with genetic algorithms [ J ]. Computers and Industrial Engineering, 1996, 30(4): 1 027-1 036.
  • 6Jianzhong Mo, Jianguo Cai, Zongmao Zhang, et al. DFA-oriented assembly relation modeling [ J ]. International Journal of Computer Integrated Manufacturing, 1999, 12 ( 3 ) : 238 - 250.
  • 7Tiffany Jordan. A comparative study: total quality management and the Japanese Poka-yoke style [ EB/OL]. http ://www. businesstrainers. net/pdf/TQM_vs_Poka_yoke. pdf,2003.
  • 8Armin Scholl, Christian Becker. State-of-the-art exact and heuristic solution procedures for simple assembly line balancing [ J]. European Journal of Operational Research, 2006, 168 ( 3 ) : 666 - 693.
  • 9Gerrit Faber, Anna Coves. Overview on sequencing in mixed model flowshop production line with static and dynamic context [ EB/OL]. http ://bibliotecnica. upc. es/reports/ioc/ IOC-DT-P-2005 - 7. pdf,2006.
  • 10Mansouri, Afshin S. A multi-objective genetic algorithm for mixedmodel sequencing on JIT assembly lines [ J ]. European Journal of Operational Research, 2005, 167 ( 3 ) : 696 - 716.

共引文献12

同被引文献21

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部